combined iBeacon advertising and standard advertising

Question

Hi 
 Any ideas how best to implement a combined iBeacon and standard advertising device (both devices are active at the same time) ? 
 The iBeacon has to send an advertisement every 100ms. 
 It would be useful if we could vary the advertisement interval for the standard device 
 Thanks in advance 
 John

FormerMember · Accepted Answer

If you need your device to advertise two different advertising packet you have the following options: 
 1) Alternate between the two advertising packets: Use a timer, app_timer for instance, to change the content of the advertising packet every given interval. 
 Advantage: Easy to implement: just use the regulart sd_xxx API. To alternate the advertising packet data, just call ble_advdata_set(--> sd_ble_gap_adv_data_set(..)). 
 Disadvantage: The device will advertise one type of the packets at the time, and alternate between the two. While one packet is advertising, it will obviously not be possible to "see" the other advertising packet. 
 2) Advertise the two advertising packets concurrently, one using the softdevice and the other using the timeslot API. The example experimental_ble_app_multiactivity -> hrs_advertiser (SDK11) shows how set up an advertiser with the timeslot API with the nRF51. Note: the timeslot advertiser in that example has not implemented scan response. 
 Advantage: The two advertising packets will be broadcasted concurrently. 
 Disadvantage: The example that we have is only implemented for nRF51 (it should be fairly easy to make it work for nRF52 as well), we have not implemented scan response in the timeslot API version (but maybe scan request/scan response is not needed?), it is harder to debug the timeslot API.

combined iBeacon advertising and standard advertising

Top Replies