OTA-DFU with nRF52832 as a network(ble) co-processor

[Prasad]

Hello All! I am going to use nRF52832 as a network co-processor. I will be using UART as the interface between the main processor and nRF52832. My question is how to go for OTA-DFU in such a scenario? My setup will be OTA-DFU request sent over ble which will be received by nrf52832. Then how to proceed to update the main processor?

Please Help me!

Regards, Prasad.

[Prasad]

1. Does nrf52832's softDevice support splitting of application & rest of the stack such that application will be running over another processor & stack will be on nrf52? But this split should be like stack has both host & controller.

2. In such case how to go for OTA-DFU?

Please Help Me! I'm stuck on this.

Regards, Prasad

[Hung Bui]

Hi Prasad,

We don't have any example that work out-of-the-box with what you want to do.

You would need to implement your own code to replace the old application with the new image.

There are 2 option on how you store the new image.

1. You store the new image on the nRF52 as normal bootloader, then instead of replacing the application on nRF52 you send the image to the main MCU via UART and replace the application on that chip.

2. You use the nRF52 as pure connectivity chip, so that the image is sent via BLE then through UART to the main MCU and store there. After you finish receiving the new image, you replace the old one.

In both case, you will need to implement your own bootloader on your MCU.

[Prasad]

Thank you Hung Bui for your reply!

In case 2 that you mentioned, correct me if I understood wrong, the BLE application will be residing in the Main MCU & ble stack(i.e. whole softdevice) will be running on nrf52. In that case: 1) Do we have any example that shows such setup that I can use as reference?

2. And if yes, does that example has OAD-DFU mechanism for nrf52?

Regards, Prasad

[Hung Bui]

1 .Yes, we provide serialization example here. The BLE stack will be on the NRF52 and the application is on the MCU.

2 . Unfortunately no. You will have to implement your own.

[Prasad]

Thank you for ur help!!!