porting smart beacon code(pca20006) to pca10028

[subodh]

Hi,

I am trying to port pca20006 smart beacon kit code to pca10028. I have attached main.c --> main.c

I am currently using following ROM and RAM configuration for pca10028. .

I am using softdevice hex from ......NordicSemiconductor/nRF_SoftDevice_S110/8.0.0/hex/s110_softdevice.hex and bootloader hex from ..... bootloader/pca10028/dual_bank_ble_s110/arm5/_build/nrf51422_xxac.hex

I can't see advertising led's as well as I can't see advertising in nrf-connect app Please help me on this issue.

[Petter Myhre]

I think you IROM1 start address is incorrect, it should be 0x18000, and the size should be 0x28000. The IRAM1 start should be 0x20002000, and the size should be 0x6000.

If that doesn't help, try without the bootloader first, does it advertise then? If not, turn off optimization, go into debug mode and put a breakpoint in the start of main(), are you hitting it?

[subodh]

Hi Petter, I tried IROM1 and IRAM1 configuration with and without bootloader suggested by you. Still no success. I can't see advertising in nrf-connect. what might be wrong in my code(main.c attached earlier in question).

[Petter Myhre]

If that doesn't help, try without the bootloader first, does it advertise then? If not, turn off optimization, go into debug mode and put a breakpoint in the start of main(), are you hitting it?