This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

DAC for use with nrf51822

I am using the nrf51822 evaluation board and was planning to use it with sound. There is no DAC included in the board so can anyone suggest a good DAC to use with the board? Thanks

Parents
  • There are many DACs that can be interfaced with either parallel, I2C, or SPI.

    I did a quick search at DigiKey for DAC, 8 to 12 bits, SPI interface, 1 channel, SMT, settling time 1us to 5us, Tube or cut-tape. I got 24 hits. Lowest price is MCP4901-E/SN from Microchip. This would give probably quite acceptable voice playback, but music would not be very nice. Number of bits and sample rate are obvious parameters, but also the quality of your speaker will also limit what you can achieve. The SPI port is certainly fast enough to do higher quality sound, if the speaker can reproduce it.

    Here is a pin compatible 12 bit DAC MCP4921T-E/MS for about twice the price of the 8 bit one.

Reply
  • There are many DACs that can be interfaced with either parallel, I2C, or SPI.

    I did a quick search at DigiKey for DAC, 8 to 12 bits, SPI interface, 1 channel, SMT, settling time 1us to 5us, Tube or cut-tape. I got 24 hits. Lowest price is MCP4901-E/SN from Microchip. This would give probably quite acceptable voice playback, but music would not be very nice. Number of bits and sample rate are obvious parameters, but also the quality of your speaker will also limit what you can achieve. The SPI port is certainly fast enough to do higher quality sound, if the speaker can reproduce it.

    Here is a pin compatible 12 bit DAC MCP4921T-E/MS for about twice the price of the 8 bit one.

Children
No Data
Related