Timestamp problem

[mani]

Hi team,

I am using sdk 12.1.0 and ble_app_hrs_c example.I enabled #define NRF_LOG_USES_TIMESTAMP 0 to 1 and iam usng nrf51822 dongle.my program gets hanged.I need to print the timestamp.I am unable to view the data from serial.please tell me what is the problem??

[jcormier]

A quick and probably dirty way to get timestamps working.

Copy counters.c and counter.h from examples/ble_central_and_peripheral/experimental/ble_app_att_mtu_throughput/ into your project.

Then make the following code changes. Assumes using pca10040 and armgcc. But should be similar for other setups.

--- a/main.c
+++ b/main.c
@@ -45,6 +45,8 @@
 #include "bsp.h"
 #include "bsp_btn_ble.h"
+#include "counter.h"
+
@@ -773,7 +775,12 @@ int main(void)
     uint32_t err_code;
     bool erase_bonds;

-    err_code = NRF_LOG_INIT(NULL);
+#if NRF_LOG_USES_TIMESTAMP==1
+    counter_init();
+    counter_start();
+#endif
+
+    err_code = NRF_LOG_INIT(counter_get);
     APP_ERROR_CHECK(err_code);
--- /pca10040/s132/armgcc/Makefile
+++ /pca10040/s132/armgcc/Makefile
@@ -29,6 +29,7 @@ SRC_FILES += \
   $(SDK_ROOT)/components/drivers_nrf/common/nrf_drv_common.c \
   $(SDK_ROOT)/components/drivers_nrf/gpiote/nrf_drv_gpiote.c \
   $(SDK_ROOT)/components/drivers_nrf/uart/nrf_drv_uart.c \
+  $(SDK_ROOT)/components/drivers_nrf/rtc/nrf_drv_rtc.c \
   $(SDK_ROOT)/components/libraries/bsp/bsp.c \
   $(SDK_ROOT)/components/libraries/bsp/bsp_btn_ble.c \
   $(SDK_ROOT)/components/libraries/bsp/bsp_nfc.c \
@@ -122,6 +123,7 @@ INC_FOLDERS += \
   $(SDK_ROOT)/components/drivers_nrf/timer \
   $(SDK_ROOT)/components/libraries/util \
   $(SDK_ROOT)/components/drivers_nrf/pwm \
+  $(SDK_ROOT)/components/drivers_nrf/rtc \
   ../config \
   $(SDK_ROOT)/components/libraries/usbd/class/cdc \
   $(SDK_ROOT)/components/libraries/csense \

--- a/pca10040/s132/config/sdk_config.h
+++ b/pca10040/s132/config/sdk_config.h
@@ -3658,7 +3658,7 @@
 // <i> Function for getting the timestamp is provided by the user

 #ifndef NRF_LOG_USES_TIMESTAMP
-#define NRF_LOG_USES_TIMESTAMP 0
+#define NRF_LOG_USES_TIMESTAMP 1
 #endif

--- a/pca10040/s132/armgcc/Makefile
+++ b/pca10040/s132/armgcc/Makefile
@@ -36,6 +36,7 @@ SRC_FILES += \
+  $(PROJ_DIR)/counter.c \
   $(SDK_ROOT)/external/segger_rtt/RTT_Syscalls_GCC.c \
   $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \
   $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \

--- a/pca10040/s132/config/sdk_config.h
+++ b/pca10040/s132/config/sdk_config.h
@@ -1835,7 +1835,7 @@


 #ifndef RTC2_ENABLED
-#define RTC2_ENABLED 0
+#define RTC2_ENABLED 1
 #endif

[jcormier]

Note counters.c is setup to count in 10ms intervals.

[DavidC]

Hallo, this modifications that I need to do it in the makefile or in the main code?

[Sigurd]

Hi DavidC,

Q: this modifications that I need to do it in the makefile or in the main code?

A: If you are using a makefile(you are in fact usign armgcc), you need to apply changes in both main code and in the makefile. All changes needed is covered in the patch snippet above.

[DavidC]

Hallo Sigurd,

When I change the value of NRF_LOG_USES_TIMESTAMP to 1 in my sdk-config.h, I have problem when i initialize the NRF_LOG_INIT.

Should i need to change the value in the main code?

[jcormier]

DavidC, Like Sigurd mentioned. The above snippet tells you all the files you need to change. It is a snippet from diff, each "--- a/main.c" line tells you what files are being modified. www.gnu.org/.../Detailed-Unified.html