• State Verified Answer
  • Replies 12 replies
  • Subscribers 73 subscribers
  • Views 4786 views
  • Users 0 members are here
Attachments (0)
Nordic Case Info
  • Case ID: 118820
Options
This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts

Simple 2.4Ghz antenna

joedamato

Hi,

We need a 2.4Ghz smd antenna, not to emit bluetooth but a in-house protocol we are testing. It will need to fit on a pcb and have good performance, and production ready (low cost enough). Think smartphone/tablet/thin devices.

Ideally, it may be set to lower the emitting range; but that is a bonus.

It should be connectable to an ARM Cortex-A9 cpu via spi or uart (or better?)

The setup, security, message format shall be defined by us. The antenna shall just transmit it.

What is the best product in the NS range that would fit best?

Thanks

Parents
  • 0

    IF you want short time to market, then you should definitely get a module. There is significant design experience, expertise, & effort required to get the PCB design correct - particularly for the RF part.

    To be honest,the links I posted aren't the kind of module you'd use in a product - they were just the first hits on google. They are for the prototyping stage. You will still need them (or something similar) for this stage!

    For production, you'd be looking at something like this: www.mouser.co.uk/.../

Reply
  • 0

    IF you want short time to market, then you should definitely get a module. There is significant design experience, expertise, & effort required to get the PCB design correct - particularly for the RF part.

    To be honest,the links I posted aren't the kind of module you'd use in a product - they were just the first hits on google. They are for the prototyping stage. You will still need them (or something similar) for this stage!

    For production, you'd be looking at something like this: www.mouser.co.uk/.../

Children
Related
Terms of service