Hi, I wonder where and how to define NRF_CLOCK_LFCLKSRC using the VisualGDB Beacon sample using VisualStudio with VisualGDB.
The sample includes
#include <stdbool.h>
#include <stdint.h>
#include "ble_advdata.h"
#include "nordic_common.h"
#include "softdevice_handler.h"
#include "bsp.h"
#include "app_timer.h"
#include "nrf_log.h"
#include "nrf_log_ctrl.h"
Regarding devzone.nordicsemi.com/.../ boards.h should include custom_boards.h where it should be defined. But boards.h looks like:
/* Copyright (c) 2014 Nordic Semiconductor. All Rights Reserved.
*
* The information contained herein is property of Nordic Semiconductor ASA.
* Terms and conditions of usage are described in detail in NORDIC
* SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
*
* Licensees are granted free, non-transferable use of the information. NO
* WARRANTY of ANY KIND is provided. This heading must NOT be removed from
* the file.
*
*/
#ifndef BOARDS_H
#define BOARDS_H
#include "nrf_gpio.h"
#if defined(BOARD_NRF6310)
#include "nrf6310.h"
#elif defined(BOARD_PCA10000)
#include "pca10000.h"
#elif defined(BOARD_PCA10001)
#include "pca10001.h"
#elif defined(BOARD_PCA10002)
#include "pca10000.h"
#elif defined(BOARD_PCA10003)
#include "pca10003.h"
#elif defined(BOARD_PCA20006)
#include "pca20006.h"
#elif defined(BOARD_PCA10028)
#include "pca10028.h"
#elif defined(BOARD_PCA10031)
#include "pca10031.h"
#elif defined(BOARD_PCA10036)
#include "pca10036.h"
#elif defined(BOARD_PCA10040)
#include "pca10040.h"
#elif defined(BOARD_WT51822)
#include "wt51822.h"
#elif defined(BOARD_N5DK1)
#include "n5_starterkit.h"
#elif defined (BOARD_D52DK1)
#include "d52_starterkit.h"
#elif defined (BOARD_ARDUINO_PRIMO)
#include "arduino_primo.h"
#elif defined(BOARD_CUSTOM)
#else
#error "Board is not defined"
#endif
#ifdef __cplusplus
extern "C" {
#endif
#define LEDS_OFF(leds_mask) do { NRF_GPIO->OUTSET = (leds_mask) & (LEDS_MASK & LEDS_INV_MASK); \
NRF_GPIO->OUTCLR = (leds_mask) & (LEDS_MASK & ~LEDS_INV_MASK); } while (0)
#define LEDS_ON(leds_mask) do { NRF_GPIO->OUTCLR = (leds_mask) & (LEDS_MASK & LEDS_INV_MASK); \
NRF_GPIO->OUTSET = (leds_mask) & (LEDS_MASK & ~LEDS_INV_MASK); } while (0)
#define LED_IS_ON(leds_mask) ((leds_mask) & (NRF_GPIO->OUT ^ LEDS_INV_MASK) )
#define LEDS_INVERT(leds_mask) do { uint32_t gpio_state = NRF_GPIO->OUT; \
NRF_GPIO->OUTSET = ((leds_mask) & ~gpio_state); \
NRF_GPIO->OUTCLR = ((leds_mask) & gpio_state); } while (0)
#define LEDS_CONFIGURE(leds_mask) do { uint32_t pin; \
for (pin = 0; pin < 32; pin++) \
if ( (leds_mask) & (1 << pin) ) \
nrf_gpio_cfg_output(pin); } while (0)
#ifdef __cplusplus
}
#endif
#endif
I'm using an Dynastream N550M8CC which is based on an nRF51422-CEAA, V3, using "onboard 32 kHz and 16 MHz crystal clocks", "The N5 module comes with 50ppm onboard 32 kHz crystal".
Compiling any uploading the Nordic_Mouse-sample works fine and I can detect the device using my smartphone.
