Hi, I'm porting an older application from Keil to SES. I'm using soft device S110 7.1 and the nRF51822ac.
Help in setting up SES FLASH and RAM would be most appreciated!
Thanks!
Hi, I'm porting an older application from Keil to SES. I'm using soft device S110 7.1 and the nRF51822ac.
Help in setting up SES FLASH and RAM would be most appreciated!
Thanks!
Yes, it looks like your FLASH/RAM settings are incorrect. Did you set the settings in the correct field, as described in the above linked blog post? You can set that SES should generate a HEX file in the project settings. Go to Linker -> Additional Ouput Format, and set this to "hex":
Yes, it looks like your FLASH/RAM settings are incorrect. Did you set the settings in the correct field, as described in the above linked blog post? You can set that SES should generate a HEX file in the project settings. Go to Linker -> Additional Ouput Format, and set this to "hex":
Great that you got it working! Please accept this answer by clicking the checkmark next to it, if this solved your problem.