FIFO buffer clogging

[Pawel]

-----------------------------EDIT--------------------------------------

I've changed topic name, because not buffer overwrite is the problem.

I need some mechanism for checking if my data packet can fit into FIFO buffer. If not, it should be just lost. It has to be all or nothing. It is unacceptable to print just part of data. I've implemented such mechanism, but it requires changes in SDK files, which I have to avoid. How should I do this?

----------

Hello,

I have custom device based on nRF52832. It is scanning for ble devices and prints the data throught the uart using NRF_LOG.

When there is a lot of devices (~100), FIFO buffer overwrites and data coming throught the uart are corrupted.

void uart_init(void)
{


uint32_t err_code;

const app_uart_comm_params_t comm_params =
  {
	.rx_pin_no    = RX_PIN_NUMBER,
	.tx_pin_no    = TX_PIN_NUMBER,
	// .rts_pin_no   = RTS_PIN_NUMBER,
	// .cts_pin_no   = CTS_PIN_NUMBER,
	.flow_control = APP_UART_FLOW_CONTROL_DISABLED,
	.use_parity   = false,
	.baud_rate    = UART_BAUDRATE_BAUDRATE_Baud115200
  };

APP_UART_FIFO_INIT(&comm_params,
					UART_RX_BUF_SIZE,
					UART_TX_BUF_SIZE,
					uart_event_handle,
					APP_IRQ_PRIORITY_LOW,
					err_code);

APP_ERROR_CHECK(err_code);

uart_rx_buffer.p_data = malloc(UART_RX_BUF_SIZE);
memset(uart_rx_buffer.p_data, 0, UART_RX_BUF_SIZE);
uart_rx_buffer.size = 0;

app_uart_flush();
}

Enabling HWFC and increasing uart buffer does not help.

My temporary solution:

In app_uart_fifo.c change static app_fifo_t m_rx_fifo; and static app_fifo_t m_tx_fifo; to non static. Add this function to my code:

static __INLINE uint32_t fifo_length(app_fifo_t * const fifo)
{
  uint32_t tmp = fifo->read_pos;
  return fifo->write_pos - tmp;
}

Check if there is enough space in FIFO buffer to print next data packet:

    uint32_t available_count = m_tx_fifo.buf_size_mask - fifo_length(&m_tx_fifo) + 1;
    if (available_count > rc)
    {
        NRF_LOG_PRINTF("%s", msg);
 }

How can I prevent FIFO overwrites without changing the SDK? I prefer lost some data instead of recive corrupted data.

nRF52832

SDK11

SoftDevice s132

[Pawel]

UART_TX_BUF_SIZE 2048 UART_RX_BUF_SIZE 512 So it is power of 2. I removed the static keyword before the fifo struct, because I need to have access to them in my function for checking how much space left in fifo buffer. I need to check if my data packet can fit in fifo buffer to prevent printing corrupted data. Example of correct output:

@scan:abcdef12345
@scan:abcdef12345
@scan:abcdef12345

Example of corrupted output because of fifo buffer overwrites, when a lot of NRF_LOG called:

@scan:abcdef12345
@scan:abcdef12345
@scan:abcd@scan:abcd12@sca@sc

How can I prevent it without editing SDK files?