nRF52 radio bit counter

[Oskar Baginski]

Hello, recently I've found an information about bit counter in Radio Module in nRF52 Product Specification. Unfortunatelly I can't find any reference at infocenter how to use it, neither can I find any example in the Internet or SDK.

In my project I am supposed to stop transmitting data after sending certain amount of packs and I think it could be helpful if I had access to this counter and in certain condition turn it on again. This information gives me lots of hope to solve my problem:

"The bit counter is started by triggering the BCSTART task, and stopped by triggering the BCSTOP task. A BCMATCH event will be generated when the bit counter has counted the number of bits specified in the BCC register."

So my question is: is there any library or example showing how to use interrupt generated by this counter?

[ovrebekk]

Hi Oskar

The bit counter is intended to count bits within the packet, and not entire packets. To count total packets you would be better of just updating a variable in the code (since you probably need to run some processing before/after each packet anyway), or set up a timer module in counter mode and have it count the END events through the PPI.

We don't have any examples for the bit counter, no, but it is used internally by some of our stacks and libraries.

Best regards
Torbjørn

[Oskar Baginski]

I suppose that PPI module is solution. Thank you for help, Torbjørn

[ovrebekk]

If you are making your own protocol then it's definitely an option. If you are using one of our libraries, such as nrf_esb.c or Gazell, then I think it's easier just to update a variable in the TX callback function.

[Oskar Baginski]

Yes indeed, I'm working on my own protocol and I think the biggest obstacle I faced has been defeated thanks to your advice.

[ovrebekk]

I am glad to hear it. The best of luck on your project :)

[Oskar Baginski]

Well I have one more question, how to count END events? I thought about checking value of the certain register but it requires timer(very fast actually) and using one is not an option. Does END event equal interrupt so I could handle it?