This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts

AS/NZS4268 Reports and Certifications for nRF52832

Hi everyone,

I am looking for reports and/or certifications that can help with our own device's certification process.

Would you know where we could find such reports: EN 301 893 and/or EN 300 328 ?

Basically anything we can use to prove compliance with ACMA standard and AS/NZS4268.

Many thanks in advance!

-Chris

Parents
  • Thanks Roger,

    We are doing a lot with test labs in Australia but we can also avoid a lot of costs by providing existing test reports and/or certifications for some of the key components of our device.

    I have been looking at other answers on the forum but also in the technical documentation section but couldn't find a clear answer.

    Here is the exact request from our certification body:

    "BLE/WiFi Testing - If existing reports are note available, then WiFi and BLE transmitters must comply with ACMA Class Licence requirements per the Short Range Devices standard and AS/NZS4268. Report to EN 301 893 (5GHz WiFi) used for CE marking for R&TTE Directive will suffice if available, however for 2.4Ghz transmitters (BLE and WiFi), report must be to EN 300 328. "

    Will be looking again on the forum.

    -Chris

Reply
  • Thanks Roger,

    We are doing a lot with test labs in Australia but we can also avoid a lot of costs by providing existing test reports and/or certifications for some of the key components of our device.

    I have been looking at other answers on the forum but also in the technical documentation section but couldn't find a clear answer.

    Here is the exact request from our certification body:

    "BLE/WiFi Testing - If existing reports are note available, then WiFi and BLE transmitters must comply with ACMA Class Licence requirements per the Short Range Devices standard and AS/NZS4268. Report to EN 301 893 (5GHz WiFi) used for CE marking for R&TTE Directive will suffice if available, however for 2.4Ghz transmitters (BLE and WiFi), report must be to EN 300 328. "

    Will be looking again on the forum.

    -Chris

Children
No Data
Related