Bootloader memory settings for 51822xxAB

[Jackxl]

Hi, I have problem with settings of memory for bootloader in 51822xxAB. I have bootloader with settings for 51422xxAC, but this chip has bigger memory. It works on nRF51422 DK, but It doesn't work on custom board with nrf51822xxAB. Custom board is functional because other application works. I use SoftDevice 110 within SDK 7.1, bootloader is from SDK7.1 too.

I set this: IROM1 Start:1B800 IRAM1 Start:0x20002000 IRAM1 Size:0x5F80 IRAM2 Start:0x20007F80 IRAM2 Size:0x80

Keil allows flashing but I see in nRFgo Studio, that address value is wrong and bootloader address is 0x3C000.

UPDATE: Bootloader settings:

After I have flashed bootloader:

UPDATE 30.3.2017: I have used your recomanded settings but without any changes. I see address 0x3c000 in nRFgo Studio.

nrf51822_xxab.hex

And now after new compilation: nrf51822_xxab.hex

[Vidar Berg]

Please refer to this thread, it explains how you can change the flash layout for the bootloader.

Update 30/3

Everything below 0x20002000 is reserved for the softdevice

As a side note, if you change the device type from xxAC to xxAB, ensure that you are including the config headers located in \bootloader\config and \bootloader\config\dfu_dual_bank_ble_pca10028.

[Vidar Berg]

Did you do a complete chip erase before you uploaded the new bootlaoder, and are you using nrfjprog to load the FW (flash alghoritm in keil cant write to the UICR registers)?