DB Discovery failing with BLE_DB_DISCOVERY_SRV_NOT_FOUND

[RPDben]

Hi,

I am trying to connect to a peripheral device but keep getting the above error on DB Discovery.

I am using the nRF52832 on a custom board with S132 and SDK 13.

I register the event like so:

static ble_uuid_t const accs_uuid = 
{
	.type = BLE_UUID_TYPE_VENDOR_BEGIN,
	.uuid = BLE_ACC_SERVICE_UUID,
};    	

ret_code_t err_code = ble_db_discovery_evt_register(&accs_uuid);
APP_ERROR_CHECK(err_code);

and then show the device a peripheral with that service which has been initialised like so:

uint32_t   			err_code;
ble_uuid_t        	service_uuid;
ble_uuid128_t     	base_uuid = BLE_ACC_BASE_UUID;

service_uuid.type = BLE_UUID_TYPE_VENDOR_BEGIN;
service_uuid.uuid = BLE_ACC_SERVICE_UUID;

err_code = sd_ble_uuid_vs_add(&base_uuid, &service_uuid.type);
APP_ERROR_CHECK(err_code);

p_accs->conn_handle = BLE_CONN_HANDLE_INVALID;

err_code = sd_ble_gatts_service_add(BLE_GATTS_SRVC_TYPE_PRIMARY,
                                &service_uuid,
                                &p_accs->service_handle);
APP_ERROR_CHECK(err_code);

but when connecting to the peripheral I am getting the above error.

Any advice would be greatly appreciated!

[RPDben]

Where do I do this, in the init function for my service? My service init is above and does that. Is this correct, or is it meant to go somewhere else?