• State Not Answered
  • Replies 5 replies
  • Subscribers 67 subscribers
  • Views 3107 views
  • Users 0 members are here
Attachments (0)
Nordic Case Info
  • Case ID: 102119
Options
This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts

NRF24LE1 QFN24 SPI problem

Andrii

Hi!

Whether there are any special requirements for SPI chip NRF24LE1 labeled NRF B 24LE1D ?

My programmer (mPro) do not work with this chip SPI.

rergards,

Andrii.

Parents
  • 0

    I am not familiar with that specific programmer, but if the pins are mapped out according to the FlashSPI pin out for the 24 pin version of nRF24LE1, it should program. The FSPI interface pin out is documented in the datasheet at chapter 17.

    It might be that this programmer does not supply VDD to the nRF-chip, try powering the nRF with 3.3V or verify with the programmer manufacturer if it's a requirement. From the documentation on the site that you linked to, it seems to provide a 3.3V source.

    Best regards Håkon

Reply
  • 0

    I am not familiar with that specific programmer, but if the pins are mapped out according to the FlashSPI pin out for the 24 pin version of nRF24LE1, it should program. The FSPI interface pin out is documented in the datasheet at chapter 17.

    It might be that this programmer does not supply VDD to the nRF-chip, try powering the nRF with 3.3V or verify with the programmer manufacturer if it's a requirement. From the documentation on the site that you linked to, it seems to provide a 3.3V source.

    Best regards Håkon

Children
No Data
Related