nRF52840 USB MSD Slow Write Speed

[Fan Jiaming]

Hi, I have recently acquire a nRF52840 preview development board to prototype a USB MSD. With the example provided in the SDK V13, I tested the write speed and it was far from usable.

I am not sure if it is the problem of the NOR chip onboard but the problem shown to be a very slow write speed with only 177 KB/s, and the write is not consistant as well with the data transfer seemingly freezed half way and resume after quite a while.

I tested it with multiple PCs running Windows 10 but the problem appears to be the same.

Is the problem from the chip or it is inherent to the USB stack included in the SDK?

Thanks.

[Turbo J]

very slow write speed with only 177 KB/s

That is not very slow. The maximum speed is around 1 MByte/sec for USB 2.0 full speed - but that would require quite some rather intelligent buffering with some more RAM, as you need to read from USB and write to memory at the same time.

The 177 kB/s is about the expected speed when you are not doing this at the same time. This keeps the source code much simpler to understand - especially when there are abnormal conditions like write errors.

[Fan Jiaming]

Could this also explain why I observed a freeze during data transfer? Is it because the read and write are not processed at the same time, therefore they take their turns which appear as a freeze?