My question is pertaining to running of sniffer to show my device name

[khosla]

50 MHz, 500 M Samples [16].logicdatamainc.txt(/attachment/98d67704ad9c5affad8d5bce2ef93315)(/attachment/f20245cb8f1c01edb4b17875b6eedc4b)01200555.pdfI am using the radio with ppi to transmit as well as receive packets through the same code. I need to record the time events.I have enabled a special button functionality to distinguish between the transmit and receive events.

I am attaching the mainc file under. I have thoroughly checked the address, and other values that i put in the packet. If you could let me know what could be the problem behind my device named "Raghav" not being showed on sniffer, even though the code is built and run properly. I even try to set break point at timer init and commented out 'app button is pushed' function but no change occurs.

I am attaching my mainc file .

[khosla]

I don't get u exactly but as i told u i need to first just get an overview of the samples obtained using sniffer and wireshark.I would be relying on the RTT viewer and Pynrfjprog for accurate results. But even after flashing the firmware again, sniffer doesnt show my device. or maybe i am missing some hint of yours. Also i tried to include the "int printf(const char *fmt,...);" statement (this is to be included in the file segger rtt.h) at the top of mainc file and just a random text hello as "printf("Hello\n");" just at the start of the main function in my code. This was to see if hello text actually gets printed when i run the debugger but nothing happens as of now.