I have taken ble_app_ancs_c_s130_pca10028 example of sdk11,s130 version 2.0.0 and i integrated Alert Notification Service,DIS[device information service] and DFU... Device is advertising in NRF CONNECT..ANCS and ANS are working fine.when i try to flash softdevice ,application and bootloader in order to do DFU with the below specification..
The below specifications is for SOFTDEVICE,
FLASH (rx) : ORIGIN = 0x01000, LENGTH = 0x1B000
RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x1F80
The below specifications is for APPLICATION,
FLASH (rx) : ORIGIN = 0x0001B000, LENGTH = 0x3C000
RAM (rwx) : ORIGIN = 0x20002020, LENGTH = 0x4000
The below specifications is for BOOTLOADER,
FLASH (rx) : ORIGIN = 0x0003C000, LENGTH = 0x3C00
IRAM1 (rwx) : ORIGIN = 0x20002C00, LENGTH = 0x5380
IRAM2 (rwx) : ORIGIN = 0x20007F80, LENGTH = 0x80
ble_enable_params.common_enable_params.vs_uuid_count =VENDOR_SPECIFIC_UUID_COUNT; VENDOR_SPECIFIC_UUID_COUNT=8;
ble_enable_params.gatts_enable_params.attr_tab_size = 0x500;
from command line am getting as ERROR: THE area to write is not erased
from NRFGO STUDIO am getting ERROR as : this hex file has data in softdevice region. try programming using program softdevice or erase all before programming.
What could be the possible reason for facing these errors?....
