• State Verified Answer
  • Locked Locked
  • Replies 7 replies
  • Subscribers 64 subscribers
  • Views 9926 views
  • Users 0 members are here
Attachments (0)
Nordic Case Info
  • Case ID: 123315
Options
This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

NRF_ERROR_NO_MEM

julienh

Hi,

I'm developing a FW with a lot of services and characteristics. Since I added the ANCS service, I have the "NRF_ERROR_NO_MEM".

Configuration : NRF51822_XXAC / S130 V2 / custom secure bootloader + DFU / Segger embedded studio / bootloader setting file to allow programing without DFU.

Section placement macro (Embedded studio) : FLASH_START=0x1b000 SRAM_START=0x20002008

I read a lot of things about this error : increase the size of the gatt table, adding "BLE_GATTS_VLOC_USER"...

Like explained on the migration guide, I checked the expected RAM size. The debug result is described below :

SDH:DEBUG:sd_ble_enable: RAM start at 0x20002008 SDH:DEBUG:RAM size should be adjusted to 0x5ff8 SDH:DEBUG:sd_ble_enable: RAM start should be adjusted to 0x20002008 :INFO:running nrf_dfu_settings_init APP:INFO:app_error_fault_handler : id=0x00004001, pc=0x00000000, info=0x20007f64 APP:INFO:err_code 00000004 in line 298 of XXXANCS/ble/ble_services.c APP:INFO:-> NRF_ERROR_BASE_NUM

I changed the SRAM size and attr_tab_size but after that, the application doesn't start like if the bootloader doesn't know where to find the application start address. Do I have to change something in the bootloader or something else that I missed?

Thank you

Parents
  • 0

    We are using SDK 12.3.0.

    I already change the size of the GATTT table but after that, the application doesn't start. Like if the bootloader was lost or with the wrong starting address. Any idea of what could be the problem?

Reply
  • 0

    We are using SDK 12.3.0.

    I already change the size of the GATTT table but after that, the application doesn't start. Like if the bootloader was lost or with the wrong starting address. Any idea of what could be the problem?

Children
No Data
Related