How to jump from Bootloader to Application (nrf51822)

[Chen Chen]

Currently, I am trying to develop nrf51822 (MDBT40) using Nordic SDK v12 (S130). The programmer I used is DAPLink from RedBear.

I am wondering how to make program to jump from bootloader to application code.

This is what I have don:

• Flash bootloader_secure example as my bootloader program:

  • Go to bootloader_secure/pca10028/armgcc/ and type "make clean; make";

  • Copy the generated .hex file in _build directory;

  • Merge the provided s130_nrf51_2.0.1_softdevice.hex with .hex file using:

    ./mergehex -m s130_nrf51_2.0.1_softdevice.hex nrf51422_xxac.hex -o bootloaderout.hex

  • Drag bootloaderout.hex file into virtual file system created by DAPLink for flashing bootloader;

• Flash Beacon Example as Application Firmware:

  • Similar to previous steps, get .hex file by making the program;

  • Merge the provided s130_nrf51_2.0.1_softdevice.hex with .hex file using:

    ./mergehex -m s130_nrf51_2.0.1_softdevice.hex nrf51422_xxac.hex -o appout.hex

  • Drag appout.hex file into virtual file system created by DAPLink for flashing application code;

From what I observed, my nrf51822 only execute the beacon app, with the secure DFU bootloader being ignore. However, from what I think, the nrf51822 should execute bootloader code, after which the application code will be executed. This can be explained by following statement in main.c from bootloader:

nrf_bootloader_app_start(MAIN_APPLICATION_START_ADDR); // the MAIN_APPLICATION_START_ADDR looks like the increment of SoftDevice

Can anyone suggest me where the mistake I may make. Thanks!

[bjorn-spockeli]

You need to generate a bootloader settings page, please see Appendix 1 in this blog post.

[Chen Chen]

After trying out many parameters, I think the reason is that the application code is flashed to wrong paces. Here is my modified linker file for application code, which I think it is correct for 16KB RAM:

MEMORY
{
    FLASH (rx) : ORIGIN = 0x1b000, LENGTH = 0x25000
    RAM (rwx) :  ORIGIN = 0x20002080, LENGTH = 0x1800
}    

However, it looks like it still doesn't work (the bootloader can be executed successfully, however the it cannot jump to application code). Could you please indicate where the problem might be? Thanks!