The setting of the device and the READ value of the application do not match(gls)

[leene99]

GLS is implemented using Nordic(S110_7.0_SDK6.1).

When set to Control solution function.

The setting of the device and the READ value of the application do not match. Type and sample_location are replaced. what is right? (device or application?)

// in device rec.meas.type = BLE_GLS_MEAS_TYPE_CONTROL ;//=> 10 rec.meas.sample_location = BLE_GLS_MEAS_LOC_CONTROL ;//=> 4

// in application => type= Venous Plasma // 4 location = reserved // 10

UUID 0x2A18 Value 0x0B 00 00 E0 07 02 0E 0E 00 0C 00 00 88 B1 4A 00 00

[leene99]

Attach our source code. But I do not know if it will help you understand it.

//my device => nordic uart port 
0x0B 00 00 E0 07 02 0E 0E 00 0C 00 00 88 B1 0A 04 00 00

//my code ( insert variable Data via UART. )

static void read_glucose_measurement(uint8_t *data, uint8_t length)
{
	ble_gls_rec_t 	rec;
    uint32_t      	err_code;
	uint8_t			idx;

    // simulate the reading of a glucose measurement.   	
    idx = 0;
	rec.meas.flags                          = (data[idx++]);

	rec.meas.sequence_number				= data[idx++]*256;
	rec.meas.sequence_number				+= data[idx++];
	rec.meas.base_time.year                 = data[idx++]*256;
	rec.meas.base_time.year                 += data[idx++];
	rec.meas.base_time.month                = data[idx++];
    rec.meas.base_time.day                  = data[idx++];
    rec.meas.base_time.hours               	= data[idx++];
    rec.meas.base_time.minutes              = data[idx++];
    rec.meas.base_time.seconds              = data[idx++];

	if(rec.meas.flags&0x01)
	{
		rec.meas.time_offset				= data[idx++]*256;
		rec.meas.time_offset				+= data[idx++];
	}
	else
		rec.meas.time_offset				= 0;

	if(rec.meas.flags&0x02)
	{
		// mmol TEST
		//if(rec.meas.flags&BLE_GLS_MEAS_FLAG_UNITS_MOL_L);
		//else
		//	rec.meas.flags |= BLE_GLS_MEAS_FLAG_UNITS_MOL_L;
		
		if(rec.meas.flags&BLE_GLS_MEAS_FLAG_UNITS_MOL_L)
		{
			// mg/dl => mmol/L => mol/L
			rec.meas.glucose_concentration.exponent = -3;
	    	rec.meas.glucose_concentration.mantissa = data[idx++]*256;
			rec.meas.glucose_concentration.mantissa += data[idx++];
			rec.meas.glucose_concentration.mantissa	= (rec.meas.glucose_concentration.mantissa)/18.01;
		}
		else
		{
			// mg/dl => Kg/L
			rec.meas.glucose_concentration.exponent = -5;
			rec.meas.glucose_concentration.mantissa = data[idx++]*256;
			rec.meas.glucose_concentration.mantissa += data[idx++];
		}

		rec.meas.type                           = data[idx++];
	    rec.meas.sample_location               	= data[idx++];
	}
	else
	{
		rec.meas.glucose_concentration.exponent	= 0;
		rec.meas.glucose_concentration.mantissa = 0;
		rec.meas.type 							= 0;
		rec.meas.sample_location 				= 0;
	}
	
	if(rec.meas.flags&0x08)
	{
		rec.meas.sensor_status_annunciation 	= data[idx++]*256;
		rec.meas.sensor_status_annunciation 	+= data[idx++];
	}
	else
		rec.meas.sensor_status_annunciation		= 0;

	
	// context 사용 
	if(rec.meas.flags&0x10)
	{
		rec.context.flags 					= data[idx++];
		
		if(rec.context.flags&0x80)
		{
			rec.context.extended_flags		= data[idx++]; 
		}
		else
			rec.context.extended_flags		= 0; 
		
		if(rec.context.flags&0x01)
		{
			rec.context.carbohydrate_id		= data[idx++]; 
			if(rec.context.flags&BLE_GLS_CONTEXT_FLAG_MED_L)
			{
				// 1unit => 0.01cc, 1000cc => 1L, 즉 1unit => 10^-5 L
				rec.context.carbohydrate.exponent	= -5;
				rec.context.carbohydrate.mantissa	= data[idx++]*256; 
				rec.context.carbohydrate.mantissa	+= data[idx++]; 
			}
			else
			{
				// 1unit => 1/22mg(=45.5ug), 즉 1unit => 1/22*10^6KG
				rec.context.carbohydrate.exponent	= -8;
				rec.context.carbohydrate.mantissa	= data[idx++]*256;
				rec.context.carbohydrate.mantissa	+= data[idx++];
				rec.context.carbohydrate.mantissa	= (rec.context.carbohydrate.mantissa)*100/22;
			}	
		}
		else
		{
			rec.context.carbohydrate_id			= 0; 
			rec.context.carbohydrate.exponent	= 0;
			rec.context.carbohydrate.mantissa	= 0;
		}
		
		if(rec.context.flags&0x02)
		{
			rec.context.meal				= data[idx++]; 
		}
		else
			rec.context.meal				= 0; 

		if(rec.context.flags&0x04)
		{
			rec.context.tester_and_health	= data[idx++]; 
		}
		else
			rec.context.tester_and_health	= 0;

		if(rec.context.flags&0x08)
		{
			rec.context.exercise_duration	= data[idx++]*256; 
			rec.context.exercise_duration	+= data[idx++]; 
			rec.context.exercise_intensity	= data[idx++]; 
		}
		else
		{
			rec.context.exercise_duration	= 0; 
			rec.context.exercise_intensity	= 0; 
		}
		
		if(rec.context.flags&0x10)
		{
			rec.context.medication_id				= data[idx++]; 
			if(rec.context.flags&BLE_GLS_CONTEXT_FLAG_MED_L)
			{
				// 1unit => 0.01cc, 1000cc => 1L, 즉 1unit => 10^-5 L
				rec.context.carbohydrate.exponent	= -5;
				rec.context.carbohydrate.mantissa	= data[idx++]*256; 
				rec.context.carbohydrate.mantissa	+= data[idx++];
			}
			else
			{
				// 1unit => 1/22mg(=45.5ug), 즉 1unit => 1/22*10^6KG
				rec.context.carbohydrate.exponent	= -8;
				rec.context.carbohydrate.mantissa	= data[idx++]*256; 
				rec.context.carbohydrate.mantissa	+= data[idx++]; 
				rec.context.carbohydrate.mantissa	= (rec.context.carbohydrate.mantissa)*100/22; 
			}	
		}
		else
		{
			rec.context.medication_id			= 0; 
			rec.context.carbohydrate.exponent	= 0; 
			rec.context.carbohydrate.mantissa	= 0;
		}

		if(rec.context.flags&0x40)
		{
			rec.context.hba1c.exponent	= -1; 
			rec.context.hba1c.mantissa	= data[idx++]*256; 
			rec.context.hba1c.mantissa	+= data[idx++]; 
		}
		else
		{
			rec.context.hba1c.exponent	= 0; 
			rec.context.hba1c.mantissa	= 0; 
		}
	}
	else
	{
		rec.context.flags 				= 0; 
		rec.context.extended_flags		= 0; 
		rec.context.carbohydrate_id		= 0; 
		rec.context.carbohydrate.exponent	= 0;
		rec.context.carbohydrate.mantissa	= 0; 
		rec.context.meal				= 0; 
		rec.context.tester_and_health	= 0;
		rec.context.exercise_duration	= 0; 
		rec.context.exercise_intensity	= 0; 
		rec.context.exercise_duration	= 0; 
		rec.context.exercise_intensity	= 0; 
		rec.context.hba1c.exponent		= 0; 
		rec.context.hba1c.mantissa		= 0; 
	}
		
    err_code = ble_gls_db_record_add(&rec);	

	m_racp_proc_mesumentRecords_reported = 0;
	m_racp_proc_contextRecords_reported = 0;
	m_racp_proc_records_reported_since_txcomplete = 0;
    if (err_code != NRF_SUCCESS)
    {
        // Do nothing.
    }	
}

[Petter Myhre]

This is not an answer. Please edit your question and include there.