nrf52832 uart buffer size

[yy]

hi, i have set the uart buffer size as 64. but when i am transmitting data,i found that the size might not enough(eg. there are 100 Bytes to send).how could i do except for expanding the size? i have try to use twice to send the data by for(;;), but it isn't successful.

[MartinBL]

Can you edit your original question and attach your entire code?

[yy]

init code:

void bsp_uart_init(void)
{
	uint32_t                     err_code;
	const app_uart_comm_params_t comm_params =
	{
		RX_PIN_NUMBER,
		TX_PIN_NUMBER,
		RTS_PIN_NUMBER,
		CTS_PIN_NUMBER,
		APP_UART_FLOW_CONTROL_DISABLED,
		false,
		UART_BAUDRATE_BAUDRATE_Baud115200
	};
	APP_UART_FIFO_INIT( &comm_params,
			                       UART_RX_BUF_SIZE,
			                       UART_TX_BUF_SIZE,
			                       uart_rx_handle,
			                       APP_IRQ_PRIORITY_LOW,
			                       err_code);
	APP_ERROR_CHECK(err_code);
}

send data func:

void bsp_uart_send_data(uint8_t * p_data, uint16_t length)
{
	uint8_t tx_buff[MAX_RX_LEN] = {0};
	uint8_t idx = 0;
	memcpy(&tx_buff[idx], p_data, length);
	idx += length;
    for (uint32_t i = 0; i < idx; i++)
    {
        while(app_uart_put(tx_buff[i]) != NRF_SUCCESS);
    }
}