freertos priority confusion

[Dave_couling]

Setting interrupt priority according to FreeRTOS documentation is an inverted priority sequencing, i.e. lower number is high priority. However in the freeRTOS example provided, Logging is set to priority 1, and BLE 2. This would then set BLE is a lower priority then logging?

I am trying to design a 5 thread system. 1) BLE 2) Logging 3) LEDs 4) SAADC 5) SPI (external Flash). Confused as to how I should prioritize these.

Also in the SDK 14 FreeRTOS example, BLE is no longer in isn't own task? What was the architecture reasoning behind this?

p.s. Note I'm using SDK 12.3 and cannot migrate over to SDK 14 quite now.

Thanks guys,

[Susheel Nuguru]

Hi Dave, In FreeRTOS low priority number means low priority (inverse to what we have on ARM core, where exception priority is higher with lower number).

You can read more about FreeRTOS priority here. Please note the line below mentioned on that page.

Low priority numbers denote low priority tasks. The idle task has priority zero (tskIDLE_PRIORITY)

I haven't tried the example in SDK14 myself but quick look shows that the function nrf_sdh_freertos_init creates a task for BLE.

[Dave_couling]

This contradicts the FreeRTOS documentation. In file list.c "...on Cortex-M parts where numerically high priority values denote low actual interrupt priorities, which can seem counter intuitive."

This is also mentioned in the FreeRTOS documentation page: www.freertos.org/RTOS-Cortex-M3-M4.html

"The next thing to know is that, in ARM Cortex-M cores, numerically low priority values are used to specify logically high interrupt priorities. For example, the logical priority of an interrupt assigned a numeric priority value of 2 is above that of an interrupt assigned a numeric priority of 5."

[Dave_couling]

Also contradicts what you stated in this thread: devzone.nordicsemi.com/.../

[Dave_couling]

Another question on this topic would be, my SAADC callback is set to interrupt priority of 6 (same as RTC). How does this translate to the SDK interrupt priorities?

Since the callbacks are technically interrupts, if I want to unlock a Semaphore do I have to use the xSemaphoreGiveFromISR() version?

Same question with an xTimer Starting and Stopping from an SAADC callback?

[Susheel Nuguru]

"The next thing to know is that, in ARM Cortex-M cores, numerically low priority values are used to specify logically high interrupt priorities. For example, the logical priority of an interrupt assigned a numeric priority value of 2 is above that of an interrupt assigned a numeric priority of 5."

This is meant for ARM cores, hardware, not for FreeRTOS. An OS cannot make priority mean different for different cores, that will be super confusing. I agree that in the post you referred where i said it wrong too, but bigzero corrected me.