This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts

nrf beacon not detectcing

image descriptionimage descriptionimage description(/attachment/a49b3ec690a646f7bead02928ff0a381)(/attachment/a22b78f8886f98aac724a2b9785f9c25)(/attachment/00e9df542ed79773e83dde5fb38e46cc)Hi all,

I have designed the nrf51822 based coin size custom board for beacon application. i programmed the code using keil and nrfgo studio its programming properly its advertising . but issue is, i can detect the device in nRF connect app and also in other beacon apps. but i am not detecting in nRF beacon application y is so?

is there any bugs in app?

please confirm.

thanks in advance.

Parents
  • Hi ,

    But i have programmed the same program which is programmed in nRF518222 Bluetooth smart kit of nordic. its working fine in that kit but not in my custom board.

    Adding to above do i need to upadate any manufacturer ID.?

  • I mean like:

    1. I take pre-compiled HEX file named xyz from this path in this nRF5 SDk version and flash it by this program with this SoftDevice HEX file to this HW.
    2. Then I see this LED blinking (or not), I turn on nRF Connect app, I see the device broadcasting (what are "RAW" advertising and scan response data??? Paste it here!) and I can connect to the device (what happens in nRF Connect then? Any change on the board e.g. LEDs blink/light differently?)
    3. Then I open nRF Beacon app and do this and that, see this and that.
    4. Then I take same HEX files and flash the same way another HW (any description of that HW???) and see this and that.
    5. Then I open nRF Connect app again and see this and that etc. ......................
Reply
  • I mean like:

    1. I take pre-compiled HEX file named xyz from this path in this nRF5 SDk version and flash it by this program with this SoftDevice HEX file to this HW.
    2. Then I see this LED blinking (or not), I turn on nRF Connect app, I see the device broadcasting (what are "RAW" advertising and scan response data??? Paste it here!) and I can connect to the device (what happens in nRF Connect then? Any change on the board e.g. LEDs blink/light differently?)
    3. Then I open nRF Beacon app and do this and that, see this and that.
    4. Then I take same HEX files and flash the same way another HW (any description of that HW???) and see this and that.
    5. Then I open nRF Connect app again and see this and that etc. ......................
Children
No Data
Related