Is external crystal neccessary at all on 52832

[Roland]

As i am migrating to 52 and tuning the ble app, i realized by reading many posts here that:

1. external HF xtal is not recommended
2. external LF xtal can be replaced by using internal xtal with temperature compensation.

So does that mean external crystal (either HF or LF ) actually not needed at all on 52?

[Sigurd]

Hi,

1. External HF crystal is mandatory if you want to use the radio peripheral. If you are using BLE, you have to use an external 32 MHz crystal with a frequency tolerance of max 40 ppm. As mentioned in this post:

The external HF clock is critical for data timing and more critical to keep the bluetooth radio on the correct frequency. All the 2.4GHz channels are derived from the 32MHz crystal. So the ppm accuracy of the xtal will be the same ppm accuracy of your carrier in the 2.4GHz band.

2 .

External LF crystal(32 kHz)is not mandatory, but recommend. See this and this post.

Since you are migrating to nRF52832, I recommend to take a look at the General PCB design guidelines for nRF52 series tutorial

[Sigurd]

Did you set the SoftDevice clock source in sdk_config.h to NRF_CLOCK_LF_SRC_RC ?

You should also set the NRF_SDH_CLOCK_LF_RC_CTIV to 32, and the NRF_SDH_CLOCK_LF_RC_TEMP_CTIV to 2.