Initializing two sensors with the same dev. add. but in different period of time with I2C in nrf51822

[Mostafa]

Hi, I'm using two sensors with the same device address through I2C. each sensor is supposed in a specific period of time (not working together), each sensor has a different enable pin and different configuration. when I initialize the sensor individually they are working fine and I get the results properly but when I'm going to combine and schedule the time, the first sensor is working and while initializing the second it's stuck.

I understand that because of the same address and alternative enable pin, it's not possible to initialize both at the main loop, that's why they are in the header file. the code is attached and I would appreciate for any tips.

#include <stdint.h>
#include <string.h>
#include <stdio.h>
#include "nordic_common.h"
#include "nrf.h"
#include "nrf_delay.h"
#include "nrf_gpio.h"
#include "nrf51_bitfields.h"
#include "softdevice_handler.h"
#include "app_error.h"
#include "ble_bas.h"
#include "ble_control.h"
#include "hw_select.h"
#include "hw_lmp91000.h"
#include "simple_uart.h"
#include "nrfface.h"
#include "debug.h"
#include "twi_master2.h"
#include "twiface.h"
#include "hw_lcd12864.h"

uint32_t sensorRAW, soundLevel, old_soundLevel, sound_level_counter;
uint8_t lmp91000_available_flag;

/**@brief Function for handling the ADC interrupt.
 * @details  This function will fetch the conversion result from the ADC, convert the value into
 *           percentage and send it to peer.
 */
/*
void ADC_IRQHandler(void)
{
    if (NRF_ADC->EVENTS_END != 0)
    {
        NRF_ADC->EVENTS_END = 0;
        sensorRAW = NRF_ADC->RESULT;
        //NRF_ADC->TASKS_STOP = 1;
		lmp91000_available_flag = 1;        
    }
}

*/



static TwiDevice LMP91000, *This = &LMP91000;

uint8_t lmp91000_get_status(void)
{
	bool ok;
	uint8_t data[1];

	ok = Twiface_readReg(This, LMP91000_STATUS_REG, data, 1);
	if (ok) {
		return data[0] & 0x01;
	}
	else {
		return 0xFF;
	}
}

void lmp91000_set_lock(void)
{
	Twiface_writeReg(This, LMP91000_LOCK_REG, 1);
}
void lmp91000_clear_lock(void)
{
	Twiface_writeReg(This, LMP91000_LOCK_REG, 0);
}


//SO2 configuration
void lmp91000_SO2_cfg(void)
{
	uint8_t result;


	nrf_gpio_pin_clear(LMP91000_SO2_MENB_PIN);
	nrf_delay_ms(1);
	nrf_gpio_pin_set(LMP91000_SO2_MENB_PIN);
	nrf_gpio_pin_clear(LMP91000_CO_MENB_PIN);
	do 
	{
		result = lmp91000_get_status();
	} while (result != 1);
	lmp91000_clear_lock();
	//nrf_delay_ms(1);
	Twiface_writeReg(This, LMP91000_TIACN_REG, LMP91000_TIA_GAIN_350KOHM | LMP91000_TIA_RLOAD_10);
	//nrf_delay_ms(1);
	Twiface_writeReg(This, LMP91000_REFCN_REG, LMP91000_REF_SOURCE_EXTERNAL | LMP91000_INT_ZERO_20 | LMP91000_BIAS_POSITIVE | LMP91000_BIAS_4);
	//nrf_delay_ms(1);
	Twiface_writeReg(This, LMP91000_MODECN_REG, LMP91000_SHORTING_FET_DISABLED | LMP91000_OP_MODE_3_LEAD_CELL);
	lmp91000_set_lock();
	nrf_delay_ms(1);

}

bool lmp91000_init(void)
{
nrf_gpio_pin_clear(LMP91000_SO2_MENB_PIN);
	nrf_delay_ms(100);
	nrf_gpio_cfg_input(LMP91000_VOUT_PIN, NRF_GPIO_PIN_NOPULL);
	
		nrf_gpio_cfg_output(LMP91000_CO_MENB_PIN);
	nrf_gpio_pin_set(LMP91000_CO_MENB_PIN);
	Twiface_initDevice(
		This, LMP91000_NAME, LMP91000_TWIUNIT, LMP91000_TWIFREQ,
		LMP91000_DEVADDR, LMP91000_SDA, LMP91000_SCL);
	return true;
}
bool lmp91000_SO2_init(void)
{
nrf_gpio_pin_clear(LMP91000_CO_MENB_PIN);
	nrf_delay_ms(100);
	nrf_gpio_cfg_input(LMP91000_VOUT_PIN, NRF_GPIO_PIN_NOPULL);
	nrf_gpio_cfg_output(LMP91000_SO2_MENB_PIN);
	nrf_gpio_pin_set(LMP91000_SO2_MENB_PIN);	
	Twiface_initDevice(
		This, LMP91000_NAME, LMP91000_TWIUNIT, LMP91000_TWIFREQ,
		LMP91000_DEVADDR, LMP91000_SDA, LMP91000_SCL);
	return true;
	
	/*

	*/
}
void lmp91000_cfg(void)
{
	uint8_t result;


	nrf_gpio_pin_clear(LMP91000_CO_MENB_PIN);
	nrf_delay_ms(1);
nrf_gpio_pin_set(LMP91000_CO_MENB_PIN);
	nrf_gpio_pin_clear(LMP91000_SO2_MENB_PIN);
	do 
	{
		result = lmp91000_get_status();
	} while (result != 1);
	lmp91000_clear_lock();
	//nrf_delay_ms(1);
	Twiface_writeReg(This, LMP91000_TIACN_REG, LMP91000_TIA_GAIN_14KOHM | LMP91000_TIA_RLOAD_10);
	//nrf_delay_ms(1);
	Twiface_writeReg(This, LMP91000_REFCN_REG, LMP91000_REF_SOURCE_EXTERNAL | LMP91000_INT_ZERO_20 | LMP91000_BIAS_POSITIVE | LMP91000_BIAS_0);
	//nrf_delay_ms(1);
	Twiface_writeReg(This, LMP91000_MODECN_REG, LMP91000_SHORTING_FET_DISABLED | LMP91000_OP_MODE_3_LEAD_CELL);
	lmp91000_set_lock();
	nrf_delay_ms(1);
	
}

/*bool lmp91000_init(void)
{

	nrf_delay_ms(100);
	nrf_gpio_cfg_input(LMP91000_VOUT_PIN, NRF_GPIO_PIN_NOPULL);
	nrf_gpio_cfg_output(LMP91000_CO_MENB_PIN);
	Twiface_initDevice(
		This, LMP91000_NAME, LMP91000_TWIUNIT, LMP91000_TWIFREQ,
		LMP91000_DEVADDR, LMP91000_SDA, LMP91000_SCL);
	return true;
}*/
void lmp91000_adc_start(void)
{
	char lcd_str[50];
	uint32_t temp, i,j,k, sensor_value, temp_value, base_value, temp1;



//SO2 configuration


	//uint32_t temp, i, sensor_value, temp_value, base_value, temp1;
	

for(j=0;j<10;j++)
{
lmp91000_init();
	lmp91000_cfg();
	NRF_ADC->INTENSET   = ADC_INTENSET_END_Disabled;
	NRF_ADC->CONFIG     = (ADC_CONFIG_RES_10bit << ADC_CONFIG_RES_Pos)  |
		(ADC_CONFIG_INPSEL_AnalogInputOneThirdPrescaling << ADC_CONFIG_INPSEL_Pos) | 
		(ADC_CONFIG_REFSEL_VBG << ADC_CONFIG_REFSEL_Pos)  |
		(LMP91000_VOUT_ADC << ADC_CONFIG_PSEL_Pos)    |		
		(ADC_CONFIG_EXTREFSEL_None  << ADC_CONFIG_EXTREFSEL_Pos);
	NRF_ADC->EVENTS_END = 0;
	NRF_ADC->ENABLE     = ADC_ENABLE_ENABLE_Enabled;
	nrf_delay_us(200);

	temp = 0;
	for(i=0; i<10; i++)
	{
		temp += get_lmp_vout();
	}

	/*sensor_value = temp / 10;

	temp_value = temperature_value / 27;
	base_value = 159 + temp_value * temp_value * temp_value / 1000 * 175 / 10000000 + temp_value * temp_value / 1000 * 6 / 100000 + 25 * temp_value / 10000;

	if(sensor_value > base_value - 1)
	{
		temp = (sensor_value - base_value) * 120;
		if (temp_value < 100)
		{
			temp1 = 10000 - ((100 - temp_value) * 9 + 300);
			sensorRAW = temp * 10000 / temp1;
		}else if (temp_value < 230)
		{
			temp1 = 10000 - ((230 - temp_value) * 3);
			sensorRAW = temp * 10000 / temp1;
		}else
		{
			temp1 = 10000 - ((temp_value - 230) * 3);
			sensorRAW = temp * temp1 / 10000;
		}
	}else*/
	{
		sensorRAW=temp ;
	}
	sprintf(lcd_str, "GAS CO(PPM)  \t");
		ssd1306_put_char(0, 0, lcd_str);
}
nrf_delay_ms(1);


	for(k=0;k<10;k++)
	
{
	

lmp91000_SO2_init();
	lmp91000_SO2_cfg();
	NRF_ADC->INTENSET   = ADC_INTENSET_END_Disabled;
	NRF_ADC->CONFIG     = (ADC_CONFIG_RES_10bit << ADC_CONFIG_RES_Pos)  |
		(ADC_CONFIG_INPSEL_AnalogInputOneThirdPrescaling << ADC_CONFIG_INPSEL_Pos) | 
		(ADC_CONFIG_REFSEL_VBG << ADC_CONFIG_REFSEL_Pos)  |
		(LMP91000_VOUT_ADC << ADC_CONFIG_PSEL_Pos)    |		
		(ADC_CONFIG_EXTREFSEL_None  << ADC_CONFIG_EXTREFSEL_Pos);
	NRF_ADC->EVENTS_END = 0;
	NRF_ADC->ENABLE     = ADC_ENABLE_ENABLE_Enabled;
	nrf_delay_us(200);

	temp = 0;
	for(i=0; i<10; i++)
	{
		temp += get_lmp_vout();
	}

	sensor_value = temp ;

	/*temp_value = temperature_value / 27;
	base_value = 159 + temp_value * temp_value * temp_value / 1000 * 175 / 10000000 + temp_value * temp_value / 1000 * 6 / 100000 + 25 * temp_value / 10000;

	if(sensor_value > base_value - 1)
	{
		temp = (sensor_value - base_value) * 120;
		if (temp_value < 100)
		{
			temp1 = 10000 - ((100 - temp_value) * 9 + 300);
			sensorRAW = temp * 10000 / temp1;
		}else if (temp_value < 230)
		{
			temp1 = 10000 - ((230 - temp_value) * 3);
			sensorRAW = temp * 10000 / temp1;
		}else
		{
			temp1 = 10000 - ((temp_value - 230) * 3);
			sensorRAW = temp * temp1 / 10000;
		}
	}else*/
	{
		sensorRAW = 0;
	}
	
	sensorRAW=temp;
	sprintf(lcd_str, "GAS SO2(PPM)  \t");
		ssd1306_put_char(0, 0, lcd_str);
}
}

[Mostafa]

I did this as you might took a look at the code but still does not work. May I ask you, please take a look at the code? Furthermore, there are 3 more sensors on the I2C, but they have the unique dev. add.

still, it runs for one device and while switching it stuck.

[Mostafa]

Thank you. problem solved.