About the problem of LE1 using dynamic payload to do Multiceiver

[Alice]

Hi all,

I'm using the LE1 to do the mutilceiver,if I donn't use the dynamic payload,I can do it successfully.However,if I use the dynamic payload to do Multiceiver,the PRX cann't receive any data.Could you give me some advise?

I have enabled all the pipe to use dynamic payload for the PRX.

SPI_RW_Reg(WRITE_REG + FEATURE, 0x04);			//enable EN_DPL
SPI_RW_Reg(WRITE_REG + DYNPD, 0x3F);	

Please see the attachment,thanks very much.

Mutilceiver.rar

[Håkon Alseth]

Hi,

In the TX example, you have mixed up registers DYNPD and FEATURE:

	SPI_RW_Reg(WRITE_REG + FEATURE, 0x3F);				//ʹÄÜFEATUREµÄEN_DPLλ
	SPI_RW_Reg(WRITE_REG + DYNPD, 0x04);				//ʹÄÜDYNPDµÄDPL_P0

The feature register should be 0x04, and dynpd should be 0x3F.

Cheers, Håkon

[Alice]

Hi Hakon,

Thank you so much for your reply.I have done it as you said,but the PRX stiil cann't receive any data.Is there any other I need to pay attention?