sd card example not working fine

[YASH]

Hi All,

I am working on fatfs example from sdk 12.2.0 on pca10040, nrf52 dk, nrf52832. And i did not change anything in the code but it seems that my sd card is not getting initialized as i am getting following message on putty:-

APP:INFO: FATFS example.

APP:INFO:Initializing disk 0 (SDC)...

APP:INFO:Disk initialization failed.

and on debug, my code goes into this if condition in diskio_blkdev.c file:- Line no.-81

if (m_drives[drv].config.wait_func == NULL)
{
    m_drives[drv].config.wait_func = default_wait_func;
}

can anyone help me understand the reason behind why this is happening and how i should deal with it?

Thank in advance.

Regards

[Peter_E]

I seems that the problem is not hardware related. I tried the fatfs example with SDK 12.3 and Keil, this configuration works, whereas SDK 14.1 with Segger Embedded Studio fails.

[Jakub Rzeszutko]

This bug is known and has been corrected in SDK13 documentation.

[NickH]

I am having the same issue using SDK 15.3 and Segger IDE with the fatfs example on pca10040 and nrf52 dk.

I get "Disk initialization failed" as the 

m_drives[drv].config.wait_func = default_wait_func;

Returns

m_drives[drv].config.last_result == NRF_BLOCK_DEV_RESULT_IO_ERROR

I have tried the setting APP_SDCARD_FREQ_DATA and APP_SDCARD_FREQ_INIT to lower frequencies and also setting the NRF_SPI_DRV_MISO_PULLUP_CFG to NRF_GPIO_PIN_NOPULL but I still get the same error.

I'm also pretty sure the VDD is the right way around as an LED lights up on the SD board (mikroBUS microSD click).

Any pointers on what else to try gratefully received...

Nick

[NickH]

I also checked the SD card is formatted OK (MS-DOS (FAT16)) and that I can write to it via PC.

I have two SD cards and get the same error with both and they take 3.3v not 5v.

[Jørgen Holmefjord]

Have you double-checked the connections to the SD card? I have tested this example multiple times with different SD cards and have not experienced issues when the connections are correct. Please also test with different SD cards and sockets if you have made sure everything else is correct.

If nothing of this helps, please post a new case where you describe your issue in detail, along with all debugging steps you have tried.