BLE UART - ble_nus_string_send() connection interval & data transfer

[leonhart88]

Hey guys,

From what I understand, the minimum connection interval on say, an iPhone, is 20ms. Also, you can send up to 6 packets of 20 bytes within a connection interval. So that's 120 bytes every 20ms.

I've been playing around with the UART peripheral example in SDK 14. I notice that the function ble_nus_string_send() sends a max length of 20 bytes.

What I want to know is how exactly are the data packets and connection interval handled? For example, if I call ble_nus_string_send() once with 20 bytes, will it just go ahead and send the 20 bytes and take up the entire 20ms connection interval?

Consequently, if I call ble_nus_string_send() 6 times with 20 bytes, will all that data transfer within the one connection interval?

Just trying to wrap my head around how this all works. I'll search for some explanations on the SDK and tutorials, but thought it might be more time effective to ask on here.

Thanks!

[leonhart88]

• I understand the connection interval is controlled by the central. I have it currently set up so that the peripheral demands a min/max of 20ms connection interval. When using the nRF Sniffer and the UART app on Android I can see that it goes through several connection updates to eventually agree upon the 20ms connection interval (from what I've read online, iOS minimum is 20ms)

• I understand what you're saying about unexpected timing of packets going out because of all the stuff the stack handles in the background. I'll try just queueing as many packet transfers as possible. I'm sampling data at 100Hz and want to make sure the BLE buffer can be sent in time before the double buffer gets full

• I'll look into the GAAT MTU stuff...I don't really know what you're referring to at the moment

• What I am a little confused about though is that when using the nRF sniffer and sending 6 successive 20 byte packets using ble_nus_string_send(), it looks like the time stamps between each packets works out to around 20ms between each packet. I thought that you are able to send up to 6 packets within one connection interval, but it seems to be only sending one packet per interval. Any suggestions?

--------------- UPDATE ------------------

See attached images. When the GAP_EVENT_LENGTH is set to 3 (default UART example), each packet is sent out every 20ms+. When I set it to 16, it seems to send out all 6 packets within the 20ms connection interval which is within spec...

• Gap event length 16.jpg
• Gap event length 3.jpg

--------------- UPDATE 2 ------------------

I tried again with GAP EVENT set to 3 and a 20ms connection interval. All other times I do see that each packet transmits at 20ms and not 40-45 like the last image...so I don't really know what happened there. See attached images. I've also included images for the last LL_CONNECTION_UPDATE message before it gets accepted to show that the connection interval is set to 20ms. So it does seem like this parameter in the config file is solving the issue. Will have to do further reading to fully understand why though.

• Connection Update - Gap Event 3.jpg
• Connection Update - Gap Event 16.jpg
• Timing - Gap Event 3.jpg
• Timing - Gap Event 16.jpg

Also, for reference, here are the Wireshark data dump files.

• Wireshark Dump - Gap Event 3.pcapng
• Wireshark Dump - Gap Event 16.pcapng

[endnode]

In case of such test simply just push some consecutive sequence of bytes (like 0x00 01 02 03...) split into 20-byte blocks through that NUS function and paste sniffer trace here for analysis. It should really give multiple packets per interval and if not then at least we can see More Data (to send) bit in PDU header so it will indicate if it's phone's stack which blocks more packets or if simply Nordic stack doesn't have more things to send (which would indicate either problem in bandwidth settings or in queuing of NUS function calls in your FW).