• State Verified Answer
  • Locked Locked
  • Replies 28 replies
  • Subscribers 62 subscribers
  • Views 27081 views
  • Users 0 members are here
Attachments (0)
Nordic Case Info
  • Case ID: 100262
Options
This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Is there an example code for using PWM on the nRF51822 with a SoftDevice?

sd

I'm looking to add PWM functionality to my design to drive an LED. Examples exist for other devices, and those don't use the SoftDevice. Is there an example or some reference design for making the PWM module work with the nRF51822 and SD?

Parents
  • 0

    Hi!

    There is an issue with flickering when receiving / sending data over BLE. I set priority to 1 and it helped a little bit. I need stable PWM signal with 10 bit resolution and aprox. 250 Hz. Is it possible with this library and reading/writing characteristics at the same time?

    Cheers, Patriko

Reply
  • 0

    Hi!

    There is an issue with flickering when receiving / sending data over BLE. I set priority to 1 and it helped a little bit. I need stable PWM signal with 10 bit resolution and aprox. 250 Hz. Is it possible with this library and reading/writing characteristics at the same time?

    Cheers, Patriko

Children
No Data
Related