Can Internal RC be used for BLE comms?

[nordicdev]

MS76SF2_SCH_V12.pdfHi, I am using SOFTDEVICE_HANDLER_INIT(NRF_CLOCK_LFCLKSRC_SYNTH_250_PPM, NULL); for ble_Stack_init() because the off the shelf board (not from Nordic) goes into a never ending loop when SOFTDEVICE_HANDLER_INIT(NRF_CLOCK_LFCLKSRC_XTAL_20_PPM, NULL) is used. The external crystal does produce clock signals, but I think the loading capacitors are not right. Anyway, if I use NRF_CLOCK_LFCLKSRC_SYNTH_250_PPM, will this RC clock be accurate enough to keep the BLE connection (I am basically using ble_app_uart as base) going? Another question is, will the EMC testing pass with NRF_CLOCK_LFCLKSRC_SYNTH_250_PPM as clock source? Thanks.

[nordicdev]

Hi RK, you are right. After I used start up code, it worked. This is what I did:

Step 1: Start HF clock (from Xtal ) manually by doing this: NRF_CLOCK->EVENTS_HFCLKSTARTED = 0; NRF_CLOCK->TASKS_HFCLKSTART = 1;

	while(NRF_CLOCK->EVENTS_HFCLKSTARTED == 0)
	{
	}    
	//till this manually start HFClk

Step 2: Synthesise the LF clock from the started HF clock by doing this: // Initialize SoftDevice. SOFTDEVICE_HANDLER_INIT(NRF_CLOCK_LFCLKSRC_SYNTH_250_PPM, NULL);

[RK]

as I pointed out earlier - synthsizing the LF clock from the HF clock is NOT recommended by Nordic and they don't (as far as I know) test that configuration. You should use the crystal OR the RC LF clock which the softdevice keeps aligned.