right way to log SEGGER RTT output into file

[makouda]

how can I store outputs sent from JLINK SEGGER_RTT to a file?

how can I send data on RTT channel 1, is there any instruction for that?

/** loop */
sprintf (buffer, "%d;%d;%d;%d;%d;%d;%d;%d;%d\n",
            x_raw_acc, y_raw_acc, z_raw_acc,
            x_raw_ger, y_raw_ger, z_raw_ger,
            x_raw_mag, y_raw_mag, z_raw_mag);
SEGGER_RTT_WriteString(0,buffer);
nrf_delay_ms(100);

RTT Logger output

[pmeilleur]

I wanted to share the most reliable and efficient method I found, which also allows using the excellent Log Viewer Log4View. Simply create and launch 2 distinct batch files, open Log4view and start debugging!

The first batch file starts the JLINK Commander that reliably connects (and reconnects) to a target, buffers and make log output available through telnet. Rename as "jlinkcommander.bat" and start it once only;

REM this is to start JLINK Commander, that collects log stuff and make it available through telnet port 19021
"C:\Program Files (x86)\SEGGER\JLink_V510d\JLink.exe" -device NRF52832_XXAA -if SWD -speed 4000 -autoconnect 1

Then the 2nd batch file can be killed and restarted as desired to "cut" the log file, and store the previous log as an archive, which can be usefull for later reference. I called it "jlink_startlog.bat" :

REM this script renames current log file, if any, to date-time format
REM then move all logs to subfolder archive
REM then starts a telnet receiver to localhost + stores output to a local file
REM this file can then be read through Log4View (file receiver, log format = pattern, %m (dump all directly)
REM Log4View could also be configured to track formatting like  UniversalTime (runtime in ms) log source, etc..
@echo off
echo wscript.echo year(date) ^& "-" ^& right(100+month(date),2) ^& "-" ^& right(100+day(date),2)^& "@" ^& right(100+hour(time),2) ^& "-" ^& right(100+minute(time),2) > "%temp%\dateparts.vbs"
for /f "tokens=1 delims=" %%a in ('cscript //nologo "%temp%\dateparts.vbs"') do set yyyymmddhhmm=%%a
echo Now you can use this in your filename: %yyyymmddhhmm%
@echo on

if EXIST rtt_debug.log (
REN rtt_debug.log "%yyyymmddhhmm% - rtt_debug.log"
)

move %~dp0\*.log %~dp0\archive

telnet localhost 19021 -f rtt_debug.log

Finally I recommend viewing the log output using Log4View. Simply configure a File Receiver, using the pattern %s to output the whole file content. You can also standardize the output format of all your NRF_LOG to feed the uptime in millisecond, the log source, the severity, etc.

[31761132] RFN0 >> [ForcedRxLoad] ignore (mode_site)
[31761134] RFN0 >> [RxProcessRun] <<< scan >>> FreqBandIsmRxDefaultOverride
[31770625] MODEM>> RX (12)
[31770626] MODEM>> 0000: C3 00 00 06 6B 17 01 00 00 00 7D EE -- -- -- -- 
[31770627] MODEM>> [ATRspProcess] app -> h_OnIpTunnelDataReceived (12)