DFU Abort - Invalid Object

Question

I've been following the instructions on how to test buttonless secure DFU without bonds using the Buttonless DFU Template Application page. 
 I followed the instructions at the bottom of the page, and loaded the two following precompiled hex files using JLinkExe's command "loadfile": 
 
 examples\dfu\secure_dfu_test_images\ble
rf52832 
softdevice_bootloader_secure_ble_debug_without_bonds_s132.hex 
 examples\dfu\secure_dfu_test_images\ble
rf52832 
ble_app_buttonless_dfu_without_bonds_s132_with_setting_page.hex 
 
 I then used nRF Connect and performed a DFU using the prepackaged test image: 
 
 examples\dfu\secure_dfu_test_images\ble
rf52832\softdevice_s132.zip 
 
 The DFU started, I could see the progress, and it completed without error. 
 I then followed the exact same steps, however this time tried to load an image I packaged myself. When I tried to start the DFU, it aborted with the message "Invalid Object." 
 In order to avoid complications, I packaged the blinky example and did so in the following way: 
 
 Created a private key: nrfutil keys generate blinky_key.pem 
 Created public key and stored in file: nrfutil keys display --key pk --format code blinky_key.pem --out_file dfu_public_key.c 
 Copied "dfu_public_key.c" to \examples\dfu\dfu_req_handling, replacing the existing file. 
 Prepared the firmware package: nrfutil pkg generate --debug-mode --application nrf52832_xxaa.hex --key-file blinky_key.pem blinky_package.zip 
 
 What's causing the invalid package? 
 Any help on the matter would be greatly appreciated.

Adam Gordon · Accepted Answer

I had previously tried generating a non-debug package, but I think the issue was with the signature. Apologies for not posting the solution that worked, I was short on time yesterday. 
 Essentially it might have come down to a couple of things, one minor, one major. The major being that I was trying to use the precompiled examples with my own generated package. This won't work because when I generate my own package, I generate a new private/public key. The precompiled examples have already been compiled using an older public key, so the signature verification will fail. Generating the new keys and THEN compiling the bootloader is what fixed the issue. 
 Also, I found it odd that I could generate a debug-mode package, but when generating bootloader settings, I needed to provide version information. So I opted not to generate any bootloader settings and compiled the bootloader_secure_ble example which had a pca10040_debug folder. I'm not quite sure of all the details, but it worked.

DFU Abort - Invalid Object

Top Replies