This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts

Power consumption of nRFready Desktop2

Hi Could you provide the power current in System on Active, System on Sleep, and System OFF for nRFready Desktop2 keyboard and mouse? nRF51 was programmed Desktop 2 v1.0.4 firmware. Thanks.

Regards, Jeffery

Parents
  • hi , i found the current issue more than spc current in PAN doc #27.

  • Sorry that I forgot to mention this, but you are correct that there is a PAN item on these currents, and on the current chip revision, you may see numbers that are above those in the PS. However, the chip-to-chip variation can be pretty high, so you might also be lucky.

    Either way, this should be fixed in the latest revision of the chip.

Reply
  • Sorry that I forgot to mention this, but you are correct that there is a PAN item on these currents, and on the current chip revision, you may see numbers that are above those in the PS. However, the chip-to-chip variation can be pretty high, so you might also be lucky.

    Either way, this should be fixed in the latest revision of the chip.

Children
No Data