Long range coexistence

[damien5606]

Hello,

We'd like to connect 50 bluetooth 5 devices (nRF52840) to a Receiver (made of multiple centrals nRF52840) with a long range (PHY 250kbps, conn interval 50ms, no dle, ATT_MTU 23)

As I understood there're 37 bluetooth channels + 3 for advertising. If I assume that a nRF52840 central can be connected at 5 nRF52840 peripheral at the same time (I guess on the same bluetooth channel), I would need 10 nrf52840 centrals in my receiver to connect all my devices. So I'd use 10 channels.

Do you think they will interfere with eachother (knowing we'll work with long distance signal so very weak ones) or the space between the channel is big enough ?

Thank you a lot,

-Damien

[endnode]

Hi Damien,

The problem of shared channels is only on 3 advertising channels but once the connection link is established all remaining 37 channels (unless devices restrict some of them through channel map) are used through frequency hopping mechanism. Since BLE is based on timed events and most of the time there is silence the capacity of whole 37-channel spectrum is enormous and even if some collisions happen here and there the link is ready to handle it transparently (so applications on top don't even notice except small drops in actual data throughput). Normally you can have hundreds or even thousands of active links with very little interference in the spectrum.

On advertising channels again devices use different timing (and there is mandatory jitter added so even if they meet on few events and interfere for few packets they will drift quickly to different timings and problem is solved) but in certain situations you might experience more crowded situations and interference. But that's when you have hundreds or rather thousands of active broadcasters or dozens of very active scanners vs. few low-frequency advertisers. So far you should be fine (and maybe some refresh about how BT LE PHY and Link Layer work would help;)

Cheers Jan

[endnode]

(2/2) In case you really see some strange behavior and you have this use-case as core then you might need to invest into radio analyzer (BLE sniffer). And because you use latest BT5 features you would need one of latest commercial analyzers (because free tools like nRF Sniffer are not ready for air-speeds different to 1Mbps) so we are speaking about 10-20k USD investment. Are you sure your problem is so serious and blocking?:)