nRF51422 HID example modification

[milko]

Hello

I'm using nRF51422 with S310 softdevice. I've been testing HID example (keyboard) for a while. What I'm trying to do is to send as much as possible bytes at once in a single report. I do like this:

uint8_t ucData[] = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz";

ble_hids_inp_rep_send(&m_hids,
                                 INPUT_REPORT_KEYS_INDEX,
                                 INPUT_REPORT_KEYS_MAX_LEN,
                                 ucData);

All works well until INPUT_REPORT_KEYS_MAX_LEN is not more than 8, otherwise it does not work. So 8 bytes is the maximum for now.

My question is: what is the max number of bytes that can be sent at a time and how to do that? And, of course, the same question applies for receiving side.

I have a feeling that report_map_data[] descriptor should be modified, but I don't know how to do that and also I can't find any documentation on this. Forget mouse, forget keyboard, I would like to make HID as generic as possible.

Regards

[Nikita]

You can use custom HID report map like this:

#define INPUT_REPORT_MAX_LEN             20                                             /**< Maximum length of the Input Report characteristic. */
#define OUTPUT_REPORT_MAX_LEN            22                                             /**< Maximum length of Output Report. */

static uint8_t report_map_data[] =
{
    0x06, 0x00, 0xFF,       // Usage Page = 0xFF00 (Vendor Defined Page 1)
    0x09, 0x01,             // Usage (Vendor Usage 1)
    0xA1, 0x01,             // Collection (Application)
    0x19, 0x01,             //      Usage Minimum 
    0x29, INPUT_REPORT_MAX_LEN,             //      Usage Maximum 
    0x15, 0x00,             //      Logical Minimum (data bytes in the report may have minimum value = 0x00)
    0x26, 0xFF, 0x00,       //      Logical Maximum (data bytes in the report may have maximum value = 0x00FF = unsigned 255)
    0x75, 0x08,             //      Report Size: 8-bit field size
    0x95, INPUT_REPORT_MAX_LEN,             //      Report Count: Make sixty-four 8-bit fields (the next time the parser hits an "Input", "Output", or "Feature" item)
    0x81, 0x00,             //      Input (Data, Array, Abs): Instantiates input packet fields based on the above report size, count, logical min/max, and usage.
    0x19, 0x01,             //      Usage Minimum 
    0x29, OUTPUT_REPORT_MAX_LEN,             //      Usage Maximum
    0x91, 0x00,             //      Output (Data, Array, Abs): Instantiates output packet fields.  Uses same report size and count as "Input" fields, since nothing new/different was specified to the parser since the "Input" item.
    0xC0                    // End Collection
};

And send your data like this:

err_code = ble_hids_inp_rep_send(&m_hids, 
                                 INPUT_REPORT_KEYS_INDEX,
                                 data_len,
                                 data);

[John]

Hi，Nikita： I'm using nRF51422 with S110 softdevice.I use your Report Map(little modify,I just defined INPUT_REPORT_MAX_LEN = 8.OUTPUT_REPORT_MAX_LEN = 1)，and send data the same as you post。then all work ok。but In PC, The BusHound can't received any data.Is other place need to modify? Sorry for disturb。