How to combine light control with remote provisioning in ble mesh?

[rahul]

HI

I've successfully executed the Light control example and remote provisioning example separately but would now like to combine the light control example with the the remote provisioning example so that I may introduce a Light server to a network at any point. How do I do this? How do I change the example such that I may do this?

Any help is much appreciated. Thank You Rahul

[Giang]

Hi Rahul , how do you build mesh example by ? If you use Segger Embedded Studio . Can you give me instruction . Thank !!!

[rahul]

Hi I used the Segger Embedded Studio for loading the NRF52 with the example codes. *Download the 'nrf5_SDK_for_Mesh_v0.9.2-Alpha' file from the Nordic semiconductors website. *Open examples *Connect your NRF5238 module to the laptop *Erase any existing code built in the device *Build the solution *download the files into the device

• You can then track the behavior of the client and server by following the debugger logs. Hope this helps.

[Hung Bui]

Hi Rahul,

Note that we have released SDK v0.10 lately.

I haven't tried myself, but it should be possible to combine the light control example and the pb-remote example.

Our suggestion is to add pb-remote model and code into the light control example.

Basically each lighting server node should add remote provisioning server so that they can relay the provisioning packet. They should still work as normal provisionee and the configuration server should still work normally.

On the lighting client, you should disable the original provisioner and use the pb-remote provisioner instead. The original configuration client should be called after provisioning is finished.

Let us know if you have any problem combining the code.

[Duy]

Have you succeeded? I tried but it failed. I got stuck with app error 4

[Gaurav]

Hi! Rahul, Are you able to do it finally? I am trying to do something similar but stuck on the client side.