How anomaly ADXL345 data UART? needed help

[mantap]

Here is calibration of UART data using ADXL345.

and the data is followed by x, y & z value, for example x = -42, y = 20, z = 268. and then after calibrated 10x which is I got mean value from (x,y,z*10 of data)/10.0.. I've got x = -26237, y = -18, z = 278.

and my question is why the data of x value is large to calculated, perhaps it's just maybe around -45 (above/lower).

anyone who can explain to fix it..

here is the code:

int calibratex()
{
  int readings[3] = {0, 0, 0};
  led1=1;
  long int sum1  = 0;
  for (int i=0; i<10; i++)
 {
   accelerometer.getOutput(readings);
   xval[i]=(readings[0]);  //nilai x adxl345
   sum1 = yval[i]+sum1;
 }

  xavg=sum1/10.0;

  led1=0;     
  return xavg;
}
 int calibratey()
 {
  int readings[3] = {0, 0, 0};
  led1=1;
  long int sum2 = 0;
  for (int i=0; i<10; i++)
  {
   accelerometer.getOutput(readings);
    yval[i]=(readings[1]); //nilai y adxl345
   sum2 = yval[i]+sum2;
 }
   yavg=sum2/10.0;
   led1=0;     
   return yavg;
 }
  int calibratez()
  {
     int readings[3] = {0, 0, 0};

     led1=1;
     long int sum3 = 0;
     for (int i=0; i<10; i++)
     {
      accelerometer.getOutput(readings);
      zval[i]=(readings[2]); //nilai z adxl345
      sum3 = zval[i]+sum3;
  }

    zavg=sum3/10.0;
    led1=0;     
    return zavg;
 }

[MartinBL]

Not sure if this is the solution, but there is an inconsistency in your three calibration functions:

int calibratex()
{
	int readings[3] = {0, 0, 0};
	led1=1;
	long int sum1  = 0;
	for (int i=0; i<10; i++)
	{
		accelerometer.getOutput(readings);
		xval[i]=(readings[0]);  //nilai x adxl345
		sum1 = yval[i]+sum1;                                     // <- BUG???? Should it be xval?
	}

	xavg=sum1/10.0;

	led1=0;     
	return xavg;
}

[MartinBL]

Your calibratex, y, and z functions look identical to me. Hence it must be something weird going on with your input value. You only call calibratex() once, and that is immediately after you have powered on the ADXL345. Maybe the sensor havn't had the time to sample a valid value yet. It could be interesting to see what would happen if you put a small delay between these two lines

accelerometer.setPowerControl(0x08);   

int avg1 = calibratex();

It could also be worth trying to call calibratex() from within your while(1) loop and monitor the values at regular intervals.