iOS refuses peripheral disconnection

[jemajuca]

On my peripheral I filter the devices connected and refuses them when not bonded. When a device not bonded tries to connect to the peripheral, it forces the disconnection and waits some seconds. It seems to work as spected, but on iOS, there are two different behavior:

Case 1, iOS device not bonded. Bonding has never occurred: -the iPhone connects -the peripheral closes the connection -the iPhone does not try to reconnect. This is the expected behavior.

Case 2, Bonding has done. Bonding is deleted only on the peripheral, not on the iPhone. -the iPhone connects -the peripheral closes the connection -the iPhone tryes to reconnect permanently, even if the app is completely closed (Nordic nRF Connect or Lightblue)

How can I avoid the iOS reconnection, if I can't remove the bond on the phone?

[Joakim Jakobsen]

Hi Jemajuca!

If you remove the bonding information on the peripheral only, the bonding keys will be deleted.
When iOS tries to reconnect, it will try to set up an encrypted connection using the previously established keys.
If the peripheral no longes have those keys, you need to manually remove the bonding information on the iOS side as well.
You can do that in the bluetooth settings on your iOS device.

Let me know if you still have any questions.
Best regards,
Joakim.

[Joakim Jakobsen]

I'm not sure if I understand your problem.
If the phone is bonded to the device and then somehow gets lost, then the problem should be irrelevant.
If the phone at a later time is found by someone that tries to connect, they won't be able to access the device, as the bonding information is already deleted on the peripheral.
It would simply be to delete the bonding information on the phone when it is found, and then reconnect.
Please correct me if I'm misunderstanding you.
Best regards.