• State Verified Answer
  • Locked Locked
  • Replies 29 replies
  • Subscribers 62 subscribers
  • Views 22381 views
  • Users 0 members are here
Attachments (0)
Nordic Case Info
  • Case ID: 102859
Options
This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Flashing bootloader and application via J-Link

Nikita

Hello. I want to make flashing of devices for production faster. So I want to write application together with bootloader via J-Link simultaneously and not via OTA DFU. I'm using S110 v6 and dual bank BLE DFU from SDK 5.1 example. I know that after flashing bootloader and application I just need to compute CRC16 of the DFU bank 0 and write this value to the bootloader settings in the flash, but maybe someone already has a solution to this problem?

Parents
  • 0

    Thanks also.

    So flashing can then be achieved with: (?) nrfjprog --program <bootloader.hex> <app.hex>

    Is the above code change all that is required? Or do we have to still write the CRC value to the bootloader settings as well?

Reply
  • 0

    Thanks also.

    So flashing can then be achieved with: (?) nrfjprog --program <bootloader.hex> <app.hex>

    Is the above code change all that is required? Or do we have to still write the CRC value to the bootloader settings as well?

Children
No Data
Related