• State Verified Answer
  • Locked Locked
  • Replies 29 replies
  • Subscribers 63 subscribers
  • Views 22493 views
  • Users 0 members are here
Attachments (0)
Nordic Case Info
  • Case ID: 102859
Options
This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Flashing bootloader and application via J-Link

Nikita

Hello. I want to make flashing of devices for production faster. So I want to write application together with bootloader via J-Link simultaneously and not via OTA DFU. I'm using S110 v6 and dual bank BLE DFU from SDK 5.1 example. I know that after flashing bootloader and application I just need to compute CRC16 of the DFU bank 0 and write this value to the bootloader settings in the flash, but maybe someone already has a solution to this problem?

Parents
  • 0

    What exactly are your your actions?

    1. Flashing S110 + bootloader + app via J-Link It must all works fine at this point.
    2. You updating your app via bootloader (?) Now your bootloader works but your newly flashed app is not loading (?) Is it correct?
Reply
  • 0

    What exactly are your your actions?

    1. Flashing S110 + bootloader + app via J-Link It must all works fine at this point.
    2. You updating your app via bootloader (?) Now your bootloader works but your newly flashed app is not loading (?) Is it correct?
Children
No Data
Related