nRFgo Studio no boards connected

[Sascha]

Hello together..

i have a problem with the nRF51 DK. I tried a little bit with this DEVkit i.e. copy the blinky example to the JLINK storage. This works fine.

Regarding to this Tutorial: devzone.nordicsemi.com/.../ When im using the nRFgo Studio to load a softdevice to the board, nRFgo only displays "no boards connected". Perhaps i did something wrong.

By the way, the links in the tutorial to the compatibility matrix and SDK documentation only show an empty page :-/

I hope someone can help me :)

data: nRFgo Studio: v1.21.1.3 Board: PCA10028 v1.2.0 SDK: 11

Thanks for your help

[Sascha]

Hi Bjørn,

thank you for that fast answer. I installed the nRF5x Command Line Tool above already.

Now i tried your steps, but the problem is not solved. The board will not appear in the nRFgo Studio under the device manager.

Am i doing something else wrong?

[bjorn-spockeli]

Does it show up as a JLink CDC UART Port under Ports(COM & LPT) in Windows Device Manager?

[Sascha]

Yes, it is "JLink CDC UART Port(COM33)"

*sry, i have just seen, that nRFgo displays the following message: "JLinkARM.dll is not correctly installed. Please run the nRF Tools installer to install the newest version." But if i do this and change the JLinkARM.dll from Tools installer with that one from Keil and IAR, nothing has changed.

[oliverpoc]

I have a similar issue and in my case the green light is blinking when I connect my nRF51 board with the computer and there is no related Port shown in the Ports (COM & LPT). I'm wondering what's the solution.

[bjorn-spockeli]

@oliverpoc: Does the nRF51 board show up as a memory storage device?