Are TWI manager implemented low power features?

[aircheese]

My environment is: SDK14.1 + SD132 V5.0 + NRF52832

2 sensors(MPU9250 + LPS22HB) 1 battery gas meter (LTC2942) are mounted on TWI ( +1mA)

SPI to spi flash. (+1mA) and UART for shell. (+1mA)

I used both manager. After putting all the sensors above in low power mode. I got still ~4mA (CPU load = 0%). I use debugging to check the peripherals. TWI are both "ENABLE" constantly. Having a rough check with the source codes, it seems like TWI the is not putting the peripheral in power down mode when the transactions are finished.

Having check with other threads, all suggested using TWI0->ENABLE = 0; to turn the peripheral off.

My questions are:

1. Is there any APIs (functions) that already provided the low power/power down with TWI manager that I missed?

2. Is it safe to useTWI0->ENABLE = 0; together with managers? (Like if i modify the manager to disable the peripheral after transaction is finished, and enable it before transaction is started)

Or am I wrong with the concept of these manager or the way i used low power in peripherals

[aircheese]

Thanks for you info. I had look at them, for these uninits in managers, yes they do turn off both. My concern is if I need to share the TWI, then I should not uninit the manager in every end of operation like reading data from one sensor. I am running a RTOS with it. Sensors are reading with different updating frequency in different task. That is why i am using managers to share the hardware resources. Am I right on here, I am not very sure.