change phy in mesh

Question

I'm working with the nRF52840 PDK and I'm wondering how to change the PHY (preferably to CODED) in a Mesh. Has that been implemented yet? Or when can we expect this feature?

Hung Bui · Accepted Answer

The following modification worked for me: In advertise.c, set_default_broadcast_configuration() change radio_mode to use RADIO_MODE_NRF_62K5BIT instead of RADIO_MODE_BLE_1MBIT. In scanner.c, scanner_config_reset() change scanner_config_radio_mode_set() to use RADIO_MODE_NRF_62K5BIT instead of RADIO_MODE_BLE_1MBIT. In radio_config.c, radio_config_config() add the following code at the end: if (p_config->radio_mode==RADIO_MODE_NRF_62K5BIT ) { NRF_RADIO->PCNF0 |=( ((RADIO_PCNF0_PLEN_LongRange << RADIO_PCNF0_PLEN_Pos) & RADIO_PCNF0_PLEN_Msk) | ((2 << RADIO_PCNF0_CILEN_Pos) & RADIO_PCNF0_CILEN_Msk) | ((3 << RADIO_PCNF0_TERMLEN_Pos) & RADIO_PCNF0_TERMLEN_Msk) ); } 4.In broadcast.c, time_required_to_send_us() add: if (radio_mode == RADIO_MODE_NRF_62K5BIT) { packet_length_in_bytes += RADIO_PREAMBLE_LENGTH_LR_EXTRA_BYTES; } And define RADIO_PREAMBLE_LENGTH_LR_EXTRA_BYTES = 9. Change 5th element in radio_mode_to_us_per_byte[] from 128 to 64. Let us know if you don't achieve longer range with this patch.

change phy in mesh

Top Replies