change phy in mesh

[kassianson]

I'm working with the nRF52840 PDK and I'm wondering how to change the PHY (preferably to CODED) in a Mesh. Has that been implemented yet? Or when can we expect this feature?

[Hung Bui]

The following modification worked for me:

1. In advertise.c, set_default_broadcast_configuration() change radio_mode to use RADIO_MODE_NRF_62K5BIT instead of RADIO_MODE_BLE_1MBIT.

2. In scanner.c, scanner_config_reset() change scanner_config_radio_mode_set() to use RADIO_MODE_NRF_62K5BIT instead of RADIO_MODE_BLE_1MBIT.

3. In radio_config.c, radio_config_config() add the following code at the end:

    if (p_config->radio_mode==RADIO_MODE_NRF_62K5BIT )
   
    {
     NRF_RADIO->PCNF0 |=(
    
                    ((RADIO_PCNF0_PLEN_LongRange << RADIO_PCNF0_PLEN_Pos) & RADIO_PCNF0_PLEN_Msk) |
                    ((2 << RADIO_PCNF0_CILEN_Pos) & RADIO_PCNF0_CILEN_Msk) |
                    ((3 << RADIO_PCNF0_TERMLEN_Pos) & RADIO_PCNF0_TERMLEN_Msk) );
           
    }
   

4.In broadcast.c, time_required_to_send_us() add:

    if (radio_mode == RADIO_MODE_NRF_62K5BIT)
    {
        packet_length_in_bytes += RADIO_PREAMBLE_LENGTH_LR_EXTRA_BYTES;
    }

And define RADIO_PREAMBLE_LENGTH_LR_EXTRA_BYTES = 9.

Change 5th element in radio_mode_to_us_per_byte[] from 128 to 64.

Let us know if you don't achieve longer range with this patch.

[Felixx]

Great job @Hung Bui! Works as expected. + 5-10m through concrete and glass. We were testing on nrf52840 DK and nrf52840 dongles, nrf5SDKforMeshv310.

Unfortunately for relays we are pushed to use Zephyr to support friend feature and Zephyr is not relaying messages. Maybe you have ideas in which direction we should dig in to apply same on Zephyr relays?