Button event on NRF_GPIO_PIN_MAP(1, X)

Question

I am using a nRF52840 PDK and trying to config 8 buttons. 
 (1) GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS to 8 (sdk_config.h) 
 (2) Add buttons define (pca10056.h) 
 Button event handler can trigger in P0.XX (e.g. XX is 3 or 4).
But the event never trigger in P1.YY (e.g. 2 or 7) 
 Can I use P1.YY as a button?? 
 #define BUTTON_7 NRF_GPIO_PIN_MAP(1,7) 
 Thanks.

MartinBL · Accepted Answer

Fullscreen 7367.app_button.c Download /** * Copyright (c) 2012 - 2017, Nordic Semiconductor ASA * * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, this * list of conditions and the following disclaimer. * * 2. Redistributions in binary form, except as embedded into a Nordic * Semiconductor ASA integrated circuit in a product or a software update for * such product, must reproduce the above copyright notice, this list of * conditions and the following disclaimer in the documentation and/or other * materials provided with the distribution. * * 3. Neither the name of Nordic Semiconductor ASA nor the names of its * contributors may be used to endorse or promote products derived from this * software without specific prior written permission. * * 4. This software, with or without modification, must only be used with a * Nordic Semiconductor ASA integrated circuit. * * 5. Any software provided in binary form under this license must not be reverse * engineered, decompiled, modified and/or disassembled. * * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * */ #include "sdk_common.h" #if NRF_MODULE_ENABLED(BUTTON) #include "app_button.h" #include "app_timer.h" #include "app_error.h" #include "nrf_drv_gpiote.h" #include "nrf_assert.h" static app_button_cfg_t const * mp_buttons = NULL; /**< Button configuration. */ static uint8_t m_button_count; /**< Number of configured buttons. */ static uint32_t m_detection_delay; /**< Delay before a button is reported as pushed. */ APP_TIMER_DEF(m_detection_delay_timer_id); /**< Polling timer id. */ static uint64_t m_pin_state; static uint64_t m_pin_transition; /**@brief Function for handling the timeout that delays reporting buttons as pushed. * * @details The detection_delay_timeout_handler(...) is a call-back issued from the app_timer * module. It is called with the p_context parameter. The p_context parameter is * provided to the app_timer module when a timer is started, using the call * @ref app_timer_start. On @ref app_timer_start the p_context will be holding the * currently pressed buttons. * * @param[in] p_context Pointer used for passing information app_start_timer() was called. * In the app_button module the p_context holds information on pressed * buttons. */ static void detection_delay_timeout_handler(void * p_context) { uint8_t i; // Pushed button(s) detected, execute button handler(s). for (i = 0; i < m_button_count; i++) { app_button_cfg_t const * p_btn = &mp_buttons[i]; uint64_t btn_mask = 1ULL << p_btn->pin_no; if (btn_mask & m_pin_transition) { m_pin_transition &= ~btn_mask; bool pin_is_set = nrf_drv_gpiote_in_is_set(p_btn->pin_no); if ((m_pin_state & (1ULL << p_btn->pin_no)) == (((uint64_t)pin_is_set) << p_btn->pin_no)) { uint32_t transition = !(pin_is_set ^ (p_btn->active_state == APP_BUTTON_ACTIVE_HIGH)); if (p_btn->button_handler) { p_btn->button_handler(p_btn->pin_no, transition); } } } } } static void gpiote_event_handler(nrf_drv_gpiote_pin_t pin, nrf_gpiote_polarity_t action) { uint32_t err_code; uint64_t pin_mask = 1ULL << pin; // Start detection timer. If timer is already running, the detection period is restarted. // NOTE: Using the p_context parameter of app_timer_start() to transfer the pin states to the // timeout handler (by casting event_pins_mask into the equally sized void * p_context // parameter). err_code = app_timer_stop(m_detection_delay_timer_id); if (err_code != NRF_SUCCESS) { // The impact in app_button of the app_timer queue running full is losing a button press. // The current implementation ensures that the system will continue working as normal. return; } if (!(m_pin_transition & pin_mask)) { if (nrf_drv_gpiote_in_is_set(pin)) { m_pin_state |= pin_mask; } else { m_pin_state &= ~(pin_mask); } m_pin_transition |= (pin_mask); err_code = app_timer_start(m_detection_delay_timer_id, m_detection_delay, NULL); if (err_code != NRF_SUCCESS) { // The impact in app_button of the app_timer queue running full is losing a button press. // The current implementation ensures that the system will continue working as normal. } } else { m_pin_transition &= ~pin_mask; } } uint32_t app_button_init(app_button_cfg_t const * p_buttons, uint8_t button_count, uint32_t detection_delay) { uint32_t err_code; if (detection_delay < APP_TIMER_MIN_TIMEOUT_TICKS) { return NRF_ERROR_INVALID_PARAM; } if (!nrf_drv_gpiote_is_init()) { err_code = nrf_drv_gpiote_init(); VERIFY_SUCCESS(err_code); } // Save configuration. mp_buttons = p_buttons; m_button_count = button_count; m_detection_delay = detection_delay; m_pin_state = 0; m_pin_transition = 0; while (button_count--) { app_button_cfg_t const * p_btn = &p_buttons[button_count]; #if defined(BUTTON_HIGH_ACCURACY_ENABLED) && (BUTTON_HIGH_ACCURACY_ENABLED == 1) nrf_drv_gpiote_in_config_t config = GPIOTE_CONFIG_IN_SENSE_TOGGLE(p_btn->hi_accuracy); #else nrf_drv_gpiote_in_config_t config = GPIOTE_CONFIG_IN_SENSE_TOGGLE(false); #endif config.pull = p_btn->pull_cfg; err_code = nrf_drv_gpiote_in_init(p_btn->pin_no, &config, gpiote_event_handler); VERIFY_SUCCESS(err_code); } // Create polling timer. return app_timer_create(&m_detection_delay_timer_id, APP_TIMER_MODE_SINGLE_SHOT, detection_delay_timeout_handler); } uint32_t app_button_enable(void) { ASSERT(mp_buttons); uint32_t i; for (i = 0; i < m_button_count; i++) { nrf_drv_gpiote_in_event_enable(mp_buttons[i].pin_no, true); } return NRF_SUCCESS; } uint32_t app_button_disable(void) { ASSERT(mp_buttons); uint32_t i; for (i = 0; i < m_button_count; i++) { nrf_drv_gpiote_in_event_disable(mp_buttons[i].pin_no); } // Make sure polling timer is not running. return app_timer_stop(m_detection_delay_timer_id); } bool app_button_is_pushed(uint8_t button_id) { ASSERT(button_id <= m_button_count); ASSERT(mp_buttons != NULL); app_button_cfg_t const * p_btn = &mp_buttons[button_id]; bool is_set = nrf_drv_gpiote_in_is_set(p_btn->pin_no); return !(is_set ^ (p_btn->active_state == APP_BUTTON_ACTIVE_HIGH)); } #endif //NRF_MODULE_ENABLED(BUTTON) Fullscreen 6675.diff.diff Download diff --git a/app_button - ORG.c b/app_button.c index 9cc9000..1c6e4f5 100644 --- a/app_button - ORG.c +++ b/app_button.c @@ -52,8 +52,8 @@ static uint32_t m_detection_delay; /**< Delay be APP_TIMER_DEF(m_detection_delay_timer_id); /**< Polling timer id. */ -static uint32_t m_pin_state; -static uint32_t m_pin_transition; +static uint64_t m_pin_state; +static uint64_t m_pin_transition; /**@brief Function for handling the timeout that delays reporting buttons as pushed. * @@ -75,12 +75,12 @@ static void detection_delay_timeout_handler(void * p_context) for (i = 0; i < m_button_count; i++) { app_button_cfg_t const * p_btn = &mp_buttons[i]; - uint32_t btn_mask = 1 << p_btn->pin_no; + uint64_t btn_mask = 1ULL << p_btn->pin_no; if (btn_mask & m_pin_transition) { m_pin_transition &= ~btn_mask; bool pin_is_set = nrf_drv_gpiote_in_is_set(p_btn->pin_no); - if ((m_pin_state & (1 << p_btn->pin_no)) == (pin_is_set << p_btn->pin_no)) + if ((m_pin_state & (1ULL << p_btn->pin_no)) == (((uint64_t)pin_is_set) << p_btn->pin_no)) { uint32_t transition = !(pin_is_set ^ (p_btn->active_state == APP_BUTTON_ACTIVE_HIGH)); @@ -96,7 +96,7 @@ static void detection_delay_timeout_handler(void * p_context) static void gpiote_event_handler(nrf_drv_gpiote_pin_t pin, nrf_gpiote_polarity_t action) { uint32_t err_code; - uint32_t pin_mask = 1 << pin; + uint64_t pin_mask = 1ULL << pin; // Start detection timer. If timer is already running, the detection period is restarted. // NOTE: Using the p_context parameter of app_timer_start() to transfer the pin states to the @@ -164,7 +164,11 @@ uint32_t app_button_init(app_button_cfg_t const * p_buttons, { app_button_cfg_t const * p_btn = &p_buttons[button_count]; +#if defined(BUTTON_HIGH_ACCURACY_ENABLED) && (BUTTON_HIGH_ACCURACY_ENABLED == 1) + nrf_drv_gpiote_in_config_t config = GPIOTE_CONFIG_IN_SENSE_TOGGLE(p_btn->hi_accuracy); +#else nrf_drv_gpiote_in_config_t config = GPIOTE_CONFIG_IN_SENSE_TOGGLE(false); +#endif config.pull = p_btn->pull_cfg; err_code = nrf_drv_gpiote_in_init(p_btn->pin_no, &config, gpiote_event_handler);

Button event on NRF_GPIO_PIN_MAP(1, X)

Top Replies