Cant't pass GAP/DISC/NONM/BV-02-C

[Andrej]

Hello everybody,

 i can't pass the test case GAP/DISC/NONM/BV-02-C with PTS Tool

My System:

• nRF51822
• SDK 12.3.0
• Softdevice S130

The tool tells me to prepare the IUT into non-discoverable mode and send an advertising report using connectable undirected advertising.

Advertising configuration:

• BLE_ADV_MODE_FAST
• Flags = BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE

Could somebody help me?

[Kenneth]

Hi,

It may be useful to have access to the GAP test specifications from here:
https://www.bluetooth.com/specifications/qualification-test-requirements#v5 

Then in the GAP test specifications document you can find in:
4.6.2.1.2 GAP/DISC/NONM/BV-02-C [Non-discoverable Mode Undirected Connectable Mode] 

"The advertising data received by the Lower Tester does not contain the Flags AD type with the Limited Discoverable or General Discoverable flags set to 1."

So I believe the only flag you should set here is BLE_GAP_ADV_FLAG_BR_EDR_NOT_SUPPORTED.

[Andrej]

I set the flag to BLE_GAP_ADV_FLAG_BR_EDR_NOT_SUPPORTED but still can't pass.

With nRF Connect on my Smartphone I can see that only this flag is set.

Any other idea?

[Kenneth]

Hi, I have double checked our own test code, it should only be necessary to set the BLE_GAP_ADV_FLAG_BR_EDR_NOT_SUPPORTED flag and for instance use the device name in the advertisment packet. Have you used any filter policy here that may prevent scanning request?

[Andrej]

Thanks for your reply, indeed the PTS tool sets the Scan Filter Policy to Accept White List Adv Only but i don't know where to change this Filter.

[Kenneth]

I was thinking of filter policy you can set when starting advertising on the peripheral, for instance:

    ble_gap_adv_params_t const adv_params =
    {
        .type        = BLE_GAP_ADV_TYPE_ADV_IND,
        .p_peer_addr = NULL,
        .fp          = BLE_GAP_ADV_FP_ANY,
        .interval    = ADV_INTERVAL,
        .timeout     = 0,
    };

however it may also be that you need to configure some filter policy in the PTS, but I am not familiar with that tool.