question about nrf51-ble-app-lbs with Softdevice 7.0?

[gootoomoon]

I try to use nrf51-ble-app-lbs with softdevice 7.0

I download ble-app-lbs at github.com/.../nrf51-ble-app-lbs

And change IROM1 start at 0x16000 lenth 0x29000.

static void advertising_init(void)
{
    uint32_t      err_code;
    ble_advdata_t advdata;
    ble_advdata_t scanrsp;
    uint8_t       flags = BLE_GAP_ADV_FLAGS_LE_ONLY_LIMITED_DISC_MODE;
    ble_uuid_t adv_uuids[] = {{LBS_UUID_SERVICE, m_lbs.uuid_type}};
    err_code = sd_ble_gap_address_get(&m_ble_addr);
    APP_ERROR_CHECK(err_code);
    err_code = sd_ble_gap_address_set(BLE_GAP_ADDR_CYCLE_MODE_NONE, &m_ble_addr);
    APP_ERROR_CHECK(err_code);
    // Build and set advertising data
    memset(&advdata, 0, sizeof(advdata));
    advdata.name_type               = BLE_ADVDATA_FULL_NAME;
    advdata.include_appearance      = true;
    advdata.flags.size              = sizeof(flags);
    advdata.flags.p_data            = &flags;
    
    memset(&scanrsp, 0, sizeof(scanrsp));
    scanrsp.uuids_complete.uuid_cnt = sizeof(adv_uuids) / sizeof(adv_uuids[0]);
    scanrsp.uuids_complete.p_uuids  = adv_uuids;
    
    err_code = ble_advdata_set(&advdata, &scanrsp);
    APP_ERROR_CHECK(err_code);
}

and will cause error 7 at

err_code = ble_advdata_set(&advdata, &scanrsp);
APP_ERROR_CHECK(err_code);

My EK is ok when I burn ble_app_hids_keyboard software.

So can you tell, where I miss?

nrf51822 EK Softdevice 7.0 SDK6.0

[wlgrd]

Could you try passing NULL instead of scanrsp to see if this causes the error? Looking at nrf_error.h, error 7 corresponds to NRF_ERROR_INVALID_PARAM