Thingy 52 TVOC no data output

[Titan]

When I update the firmware to version 2.1.0, the value that TVOC reads is always 0, whether or not it is related to the thingy gas sensor requires 48 hours of operation time (burn in) to self-calibrate.

How to do burn in action on gas sensor?

[Joakim Jakobsen]

Hi again!

So I tested this with an Iphone 6 and it still works, and I get valid data for the air quality when testing it with Iphone 6 and your setup.
However, I only got the chance to test this using the latest iOS version.

Maybe you have another Thingy and/or a phone that you can use to test this?

Cheers.

[Titan]

Hi Joakim
I tried using raspberry pi 3 test situation is the same
The program I tested was linked from the sample code downloaded from github as follows github.com/.../Nordic-Thingy52-Nodejs

[Joakim Jakobsen]

Hi!

Maybe you could send me a PM with information about where you got your Thingy:52?

Cheers.

[Titan]

Hi Joakim
I got the new Thingy from Nordic Tech Tour 2018 today.
Gas sensor function  is normally, old Thingy should have some problems
Thanks for your help

[Joakim Jakobsen]

Thanks good to hear.

Good luck with your new Thingy:52.

Best regards!