Quick connection parameters update

[Ziran]

Hello everyone,

I'm currently trying to change the connection parameters to be quick(100ms 0 slave latency) on a button press and after a timer timeout I go back to the low connection parameters.

I'm also sending a notification to an android application at the same time and then send back 2 characteristic ( LED toggle and a string for a LCD) .

It's working but it take quite a long time (10s) for my application to change the connection parameters so the 2 characteristic are not sent at quick connection parameters the first time but if I press a second time it's then updated and send it quickly.

Do you guys know a workaround this problem ?

[Knut Eldhuset]

Hi,

The Bluetooth spec says that the master should allow a minimum of 6 connection events before the new connection parameters are applied. This could easily amount to 10s, depending on the old connection interval.

You could try using a short connection interval and increasing slave latency to send the notifications more quickly. This would also conserve power.

BR

[Ziran]

Thks for the reply ^^ My "low" connection parameters are 1s for the max interval connection and 3 slave latency . How high could I go for the Slave latency for maximum current economy ?