Programming nRF51822 via 6pin?

[bolteon]

Hello all,

So I've ran into an unfortunate situation, our firmware team decided to ditch us just as we're about to launch our product. I got a dump from them including just about everything we ever paid them to do, and have made my way through programming our PCB boards via an AVR ISP MkII and getting our iOS and Android apps to compile via the ionic framework.

The last thing I've left to do to get us back up and running as we look for replacements is programming the Raytec MDBT40 which houses the nRF51822. Along the lines of developement we had decided to use Adafruits firmware for the unit as it had extensions written that were favorable to what we wanted to do with the module.

Looking through the dump, this seems to be the instruction set to upload the firmware via the 6pin connector on our daughter board, and from what I gather- we need to upload it via a JLink (which we have) but need the 20pin to 6pin adapter (just the PCB part, not the cable since we already have a cable that we use for the AVR ISP MkII).

 .\JLink.exe -if SWD -device nRF51822 -speed auto
 
loadfile  <PATH>\Adafruit_BluefruitLE_Firmware-master\Adafruit_BluefruitLE_Firmware-master\softdevice\s110_nRF51822_7.1.0_softdevice.hex
loadfile  <PATH>\Adafruit_BluefruitLE_Firmware-master\Adafruit_BluefruitLE_Firmware-master\0.5.0\blefriend\blefriend_s110_xxaa_0_5_0_150224_blefriend_release.hex
r
g
for spifriend go to:
loadfile  <PATH>\Adafruit_BluefruitLE_Firmware-master\Adafruit_BluefruitLE_Firmware-master\softdevice\s110_nRF51_8.0.0_softdevice.hex
loadfile <PATH>\Adafruit_BluefruitLE_Firmware-master\Adafruit_BluefruitLE_Firmware-master\0.7.7\blespifriend\blespifriend_s110_xxac_0_7_7_161213_blespifriend.hex

Is there anything I'm missing? Does anyone know if I can buy just the PCB part without the cable? I know that seems silly but why have 2 cables?

Regardless, if there's anyway to do this update via OTA- a bit of help would be appreciated as I haven't found a way to do it via the Adafruit BLE app nor the Nordic BLE Connect app... every time I try to get the module into DFU- it disconnects.

Much appreciate any help and guidance, cheers.

[bolteon]

Still at a complete loss as to getting this setup properly... I've tried 3 different computers now, 2 Windows and a MacOS. All eventually get to the same point of not being able to connect after outputting this in console:

MacBook-Pro:jlink user$ JLinkexe -if SWD -device nRF51822 -speed auto
SEGGER J-Link Commander V6.20i (Compiled Nov 17 2017 17:33:48)
DLL version V6.20i, compiled Nov 17 2017 17:33:39

Connecting to J-Link via USB...O.K.
Firmware: J-Link V10 compiled Apr 20 2018 16:47:09
Hardware version: V10.10
S/N: 260104503
License(s): FlashBP, GDB
OEM: SEGGER-EDU
VTref = 1.019V


Type "connect" to establish a target connection, '?' for help
J-Link>connect
Device "NRF51822_XXAA" selected.
TotalIRLen = ?, IRPrint = 0x..000000000000000000000000
TotalIRLen = ?, IRPrint = 0x..000000000000000000000000


Connecting to target via SWD
Cannot connect to target.
J-Link>connect
Device "NRF51822_XXAA" selected.


Connecting to target via SWD
Cannot connect to target.
J-Link>connect
Device "NRF51822_XXAA" selected.

Can someone please help me get this setup correctly? It's a bit insane to still not have a functional dev env after 4 days of effort... (conversely, I could program with the AVR ISP MkII in an hour of getting the package in the mail).

[Nguyen Hoan Hoang]

Some thing odd here.  AVR ISP cannot program the nRF chip.  It is only made for the Atmel AVR.  I am not sure to completely understand your setup.  Another thing, I see from your JLink output that the target voltage is only 1.019V.  That will not work for nRF51 chip.  It needs at least 1.75V 

[bolteon]

I was referring to programming the Atmel MCU with the AVR ISP MkII...

The highest I've seen the voltage come through is 1.025V, any idea on how this could be an issue? Every board I've used has been in that range, and this is the prescribed method to programming the boards BLE module...

Currently powering the board through a benchtop SLA 12V battery.

[bolteon]

Just plugged the unit into a car's OBDII port (it's powered/connected by the port) and still getting the same voltage.

Also powered up the board on benchtop again through a secondary set of pins, still 1.025V.

Seems like that should be my issue?

[Nguyen Hoan Hoang]

Are you sure your nRF board already worked in the past.  The chip specification is 1.75V-3.6V.  I will never work bellow 1.75V.  I think you need to review your HW design first.

[bolteon]

Yes, we have around 25 units sitting in front of me here, and a hand full of them have been programmed successfully.

They're all the same build of modules, different revisions- there's likely just something I'm doing incorrectly or is missing from our bring-up procedure.